牌号简介 About |
---|
Somos® NeXt LV Grey制造了高模量的坚固、类似ABS的零件,同时保持低粘度,便于轻松清洁。Somos® NeXt LV Grey具有良好的耐水性和热性能。这第三代索莫斯高冲击材料专注于制造高质量的树脂,可以生产坚硬、复杂的零件。应用Somos® NeXt LV Grey生产的零件比标准SL树脂更耐断裂和开裂。它非常适合用于功能测试和小批量生产应用。这种树脂非常适合功能性的最终用途性能部件,尤其是卡扣式设计、叶轮、连接器和运动用品。 Somos® NeXt LV Grey creates tough, ABS-like parts with a high modulus while maintaining a low viscosity for effortless cleaning. Somos® NeXt LV Grey has good water resistance and thermal properties. This third generation Somos® high impact material focuses on creating quality resins that can produce tough, complex parts. Applications Somos® NeXt LV Grey produces parts that are more resistant to fracture and cracking than standard SL resins. It is ideal for use in functional testing and low-volume manufacturing applications. This resin is excellent for functional end-use performance parts, especially snap-fit designs, impellers, connectors, and sporting goods. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.12 | g/cm³ | |
吸水率 Water absorption rate |
|||
平衡 balance |
0.36 到 0.40 | % | ASTM D570 |
粘度 viscosity |
|||
30℃ 30℃ |
0.48 | Pa·s | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
30 到 35 | J/m | ASTM D256-A |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
ASTM D648B | ||
0.45 MPa,未退火 0.45 MPa, unannealed |
53.0 到 57.0 | ℃ | ASTM D648-B |
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648-B | |
玻璃化转变温度 Glass transition temperature |
℃ | ASTM E1545 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
ASTM E831 | ||
-- -- 2 |
cm/cm/℃ | ASTM E831 | |
-- -- 3 |
cm/cm/℃ | ASTM E831 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
介电强度 Dielectric strength |
kV/mm | ASTM D149 | |
介电常数 Dielectric constant |
|||
1 kHz 1 kHz |
ASTM D150 | ||
耗散因数 Dissipation factor |
|||
1 kHz 1 kHz |
ASTM D150 | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Critical Exposure Critical Exposure |
mJ/cm² | ||
渗透深度 Penetration depth |
µm | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ASTM D2240 | ||
拉伸模量 Tensile modulus |
MPa | ASTM D638 | |
拉伸强度 tensile strength |
|||
屈服 yield |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
ASTM D638 | ||
屈服 yield |
% | ASTM D638 | |
断裂 fracture |
% | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 before Tg (44°C) |
3 after Tg (44°C) |
【新闻资讯】查看全部
财政部:1-2月一般公共预算收入41805亿元 同比增长18.7%
2021-03-19 搜料网资讯: 财政部18日公布2021年1-2月财政收支情况。数据显示,1-2月累计,全国一般公共预算收入41805亿元,同比增长18.7%;全国一般公共预算支出35733亿元,同比增长10.5%。 一、全国 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |