牌号简介 About |
---|
Gravi-Tech™ GRV-NP-110-W-NAT是一种聚酰胺12(尼龙12)产品,。 它可以通过注射成型进行加工,在亚太地区、北美洲、拉丁美洲、欧洲或非洲和中东有供货。 Gravi-Tech™ GRV-NP-110-W-NAT的应用领域包括体育用品、医疗/保健 和 工业应用。 特性包括: 冲击改性 无毒 Gravi-Tech™ GRV-NP-110-W-NAT is a Polyamide 12 (Nylon 12) product. It can be processed by injection molding and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Gravi-Tech™ GRV-NP-110-W-NAT include industrial applications, medical/healthcare and sporting goods. Characteristics include: Impact Modified Non-Toxic |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
11.0 | g/cm³ | ASTM D792 |
收缩率 Shrinkage rate |
|||
MD MD |
0.40 到 0.60 | % | ASTM D955 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus 2 |
8270 | MPa | ASTM D638 |
拉伸强度 tensile strength 2 |
|||
屈服 yield 2 |
27.2 | MPa | ASTM D638 |
拉伸应变 Tensile strain 2 |
|||
断裂 fracture 2 |
1.8 | % | ASTM D638 |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
弯曲强度 bending strength |
MPa | ASTM D790 | |
泊松比 Poisson's ratio |
ASTM E132 | ||
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃,3.2mm,注塑成型 23 ℃, 3.2mm, injection molding |
J/m | ASTM D256-A | |
悬臂梁无缺口冲击强度 Notched impact strength of cantilever beam |
|||
23℃,3.2 mm,注塑成型 23 ℃, 3.2 mm, injection molding |
J/m | ASTM D256 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
ASTM D648 | ||
0.45 MPa,未退火,6.35 mm 0.45 MPa, unannealed, 6.35 mm |
℃ | ASTM D648 | |
1.8 MPa,未退火,6.35 mm 1.8 MPa, unannealed, 6.35 mm |
℃ | ASTM D648 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
ASTM E831 | ||
MD:0~32℃ MD:0~32℃ |
1/℃ | ASTM E831 | |
MD:60~100℃ MD:60~100℃ |
1/℃ | ASTM E831 | |
TD:0~32℃ TD:0~32℃ |
1/℃ | ASTM E831 | |
TD:60~100℃ TD:60~100℃ |
1/℃ | ASTM E831 | |
导热系数 Thermal conductivity coefficient 3 |
W/m/K | ASTM C177 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity |
|||
3.18 mm 3.18 mm |
ohms | ASTM D257 | |
体积电阻率 Volume resistivity |
|||
3.18 mm 3.18 mm |
ohms·cm | ASTM D257 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 类型 1, 0,20 in/min |
3 The value listed as thermal conductivity, ASTM C177, was tested in accordance with ASTM E1461. |
【新闻资讯】查看全部
Gebau Kunststoff推销Nordson片材模头
2017-04-24 根据最近在莫斯科举行的橡塑展上达成的协议,Gebau Kunststoff从Nordson Corporation采购了一种具有全新调节机制的片材模头,该模头能够以史无前例的速度改变片材厚度,扩大可生产的厚度范围。 Gebau技术总监Grigorii Mulevan引述,可以延长运行时间和提高质量是他们选择这种新模头的两大原因。“SmartGap 模头将使我们能够在整个厚度范围内实现更快速的转换,而不至于中断生产,同时减少 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |