牌号简介 About |
---|
PRM-35ARN是一种经认证的一级注塑共聚物,设计用于要求高刚度和良好冲击强度的极好平衡的应用。PRM-35ARN的配方具有防静电功能,可防止灰尘堆积,具有高质量的直型成型平面的可控流变性,并具有成核的优点:更快的模具设置,减少翘曲和凹陷痕迹,无应力增白,改善张力和刚度。PRM-35ARN的典型应用包括薄壁食品容器、人造黄油桶、酸奶和冰淇淋罐、录像带盒、玩具、花盆和促销饮料杯。PRM-35ARN符合FDA法规21CFR 177.1520(a)(3)(i)/(c)3.1+3.2,以及大多数与食品接触使用聚丙烯相关的国际法规。 PRM-35ARN is a certified prime grade Injection Molding copolymer designed for applications requiring excellent balance of high stiffness and good impact strength. PRM-35ARN is formulated with Antistatic for protection against dust build-up, features Controlled Rheology for high quality straight flat surfaces of moldings, and advantages of Nucleation: faster mold set-up, reduced warpage and sink marks, freedom from stress whitening, improved tensiles and stiffness. PRM-35ARN typical applications include thin-walled food containers, margarine tubs, yogurt and ice-cream pots, Video cassette boxes, toys, flower pots, and promotional drinking cups. PRM-35ARN complies with FDA regulation 21CFR 177.1520 (a)(3)(i) / (c)3.1+3.2, and most international regulations concerning the use of Polypropylene in contact with food. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.900 | g/cm³ | ASTM D1505 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
35 | g/10min | ASTM D1238 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃,注塑成型 23 ℃, injection molding |
43 | J/m | ASTM D256 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火,注塑成型 0.45 MPa, unannealed, injection molded |
93.0 | ℃ | ASTM D648 |
维卡软化温度 Vicat Softening Temp |
148 | ℃ | ASTM D1525 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength 2 |
|||
屈服,注塑成型 Yield, injection molding 2 |
MPa | ASTM D638 | |
拉伸应变 Tensile strain 2 |
|||
屈服,注塑成型 Yield, injection molding 2 |
% | ASTM D638 | |
弯曲模量 Bending modulus 3 |
|||
1% 正割,注塑成型 1% cut, injection molding 3 |
MPa | ASTM D790 | |
洛氏硬度 Rockwell hardness |
|||
R 级 R-level |
ASTM D785 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 2.0 in/min |
3 0.051 in/min |
【新闻资讯】查看全部
网购一次性不可降解塑料制品,海口一美食店被罚1500元
2021-04-06 搜料网资讯: 4月4日消息,为进一步落实禁塑工作,海南省市场监督管理局联合各分局将禁塑工作常态化,严厉打击各类违法违规行为。近日,海口秀英金源美食店因违规使用一次性不 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |