牌号简介 About |
---|
通过部分工业废料回收获得聚丙烯均聚物;30%滑石和玻璃纤维增强,化学耦合。高流动性,特别适用于复杂细节的注塑成型;优异的热性能和机械性能。可提供黑色和天然版本,并根据样品着色。 Polypropylene homopolymer obtained by partial selected industrial scraps recycling; 30% talc and glass fiber reinforced, chemically coupled. High flowability, specific for injection molding of complex particulars; excellent thermal and mechanical properties. Available in black and natural version and colored as per sample. |
产品描述 Product Description
颜色:黑色,自然色,可用颜色
加工条件:注射成型 Injection Molding
性能特点: 防火阻燃等级HB; 化学耦合; 热稳定性好; 均聚物; 流动性高; High liquidity,Chemical coupling,Heat Stabilized,Homopolymer,HB
填料:玻璃纤维/滑石粉 30
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.14 | g/cm³ | ISO 1183 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
12 | g/10min | ISO 1133 |
收缩率 Shrinkage rate |
ISO 294-4 | ||
TD TD |
1.0 | % | ISO 294-4 |
MD MD |
0.50 | % | ISO 294-4 |
吸水率 Water absorption rate 2 |
|||
23℃,24hr 23℃,24hr 2 |
0.020 | % | ISO 62 |
灰份含量 Ash Content |
% | ISO 3451 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁无缺口冲击强度 Charpy Unnotch Impact strength |
|||
23℃ 23℃ |
kJ/m² | ISO 179/1eU | |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
ISO 180/1A | ||
-20℃ -20℃ |
kJ/m² | ISO 180-1A | |
23℃ 23℃ |
kJ/m² | ISO 180-1A | |
老化性能 Aging performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
加速烘箱老化 Accelerate oven aging |
|||
150℃ 150℃ |
day | ISO 4577 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ISO 75-2/A | |
维卡软化温度 Vicat Softening Temp |
|||
B50 B50 |
℃ | ISO 306 | |
球压测试 Ball pressure test |
|||
125℃ 125℃ |
IEC 335 | ||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
3.00 mm 3.00 mm |
UL 94 | ||
灼热丝可燃性指数 Glowing wire flammability index |
|||
2.0 mm 2.0 mm |
℃ | IEC 60695-2-12 | |
极限氧指数 Extreme oxygen index |
% | ISO 4589-2 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D,15 秒 Shore D, 15 seconds |
ISO 868 | ||
拉伸强度 tensile strength |
|||
断裂,23℃ Fracture, 23 ℃ |
MPa | ISO 527-2/20 | |
拉伸应变 Tensile strain |
|||
断裂,23℃ Fracture, 23 ℃ |
% | ISO 527-2/20 | |
弯曲模量 Bending modulus 3 |
|||
23℃ 23℃ 3 |
MPa | ISO 178 | |
弯曲强度 bending strength |
|||
23℃ 23℃ |
MPa | ISO 178 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 50%RH |
3 0.079 in/min |
【新闻资讯】查看全部
东方雨虹:全面发力城市更新,广泛招募城市合作商
2022-05-01 近日, 东方雨虹 城市更新正式通过东方雨虹官微发布城市更新理念片,明确东方雨虹城市更新城市更新及可持续运营平台的 核心 定位,聚合产业资源的平台思维,以战略合作模式、合 |