牌号简介 About |
---|
说明:Cosmic D69/6130是一种长玻璃纤维填充的通用邻苯二甲酸二烯丙酯模塑料,以片状形式提供。它可以很容易地在压缩或传输设备中成型,并且可以很容易地预成型以便于搬运。它可以在室温下保存两年而不会降低性能。特点D69/6130结合了高冲击强度,高绝缘电阻,优良的压缩和弯曲强度,易于成型的优点。应用结构零件、外壳、端子和绝缘体,或其他需要强度的应用。 DESCRIPTION Cosmic D69 / 6130 is a long glass fiber filled, general purpose diallyl ortho phthalate molding compound which is supplied in a flake form. It can be easily molded in compression or transfer equipment and can be readily preformed for ease in handling. It can be stored at room temperature for two years without reducing performance. FEATURES D69 / 6130 combines the advantages of high impact strength, high insulation resistance, excellent compressive and flexural strength, and easy moldability. APPLICATIONS Structural parts, housings, terminals and insulators, or other applications requiring strength. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.72 | g/cm³ | |
紧缩率 Shrinkage rate |
6.0 | ||
收缩率 Shrinkage rate |
|||
MD MD |
0.10 到 0.40 | % | |
尺寸稳定性 dimensional stability |
< 0.010 | % | |
吸水率 Water absorption rate 2 |
|||
平衡,50℃ Equilibrium, 50 ℃ 2 |
0.30 | % | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
MPa | ||
弯曲强度 bending strength |
MPa | ||
压缩强度 compressive strength |
MPa | ||
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
J/m | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD:-40~100℃ MD:-40~100℃ |
1/℃ | ||
热变形温度 Hot deformation temperature |
℃ | ||
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity |
|||
-- -- 3 |
ohms | ||
-- -- 4 |
ohms | ||
体积电阻率 Volume resistivity |
|||
-- -- 3 |
ohms·cm | ||
-- -- 4 |
ohms·cm | ||
介电强度 Dielectric strength 5 |
|||
Dry Dry |
kV/mm | ||
湿润 moist |
kV/mm | ||
介电常数 Dielectric constant |
|||
1 kHz 1 kHz 6 |
|||
1 kHz 1 kHz 7 |
|||
1 MHz 1 MHz 6 |
|||
1 MHz 1 MHz 7 |
|||
耗散因数 Dissipation factor |
|||
1 kHz 1 kHz 6 |
|||
1 kHz 1 kHz 7 |
|||
1 MHz 1 MHz 6 |
|||
1 MHz 1 MHz 7 |
|||
耐电弧性 Arc resistance |
sec | ||
击穿电压 breakdown voltage |
|||
Dry Dry |
V | ||
Wet Wet |
V | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Water Extract Conductivity Water Extract Conductivity |
µS/cm |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 48 hrs |
3 30 days @ 100% RH @ 70°C |
4 As Is |
5 方法B(逐步) |
6 Wet |
7 Dry |
【新闻资讯】查看全部
2016阿博格技术节:工厂欣赏篇
2016-03-17 2016阿博格技术节已经开幕,来自北京,上海,香港的飞机将五湖四海的中国客户都带到了目的地德国,开启一次技术盛宴之旅! 本次技术节分为三个参观团,分别是:注塑工厂参观团 (Oechsler、Weber、WG、TRW)、自动化参观团 (Kuka、Waldorf、Foboha) 和模具参观团 (Maenner、Braunform、Zahoransky、Kebo)。 第一天参观行程如下: 注塑工厂篇 - Oechsler裕克施乐 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |