牌号简介 About |
---|
Oxpekk生物复合智能材料由多层连续碳纤维和热塑性Oxpekk树脂组成。纤维在零件内定向,因此坐姿由纤维方向定义。克服了金属和传统高分子材料各向同性的特点,开创了动态稳定和运动保持的新纪元。迄今为止,骨科植入物设计工程师依靠复杂的机械组件和关节表面来保持运动。OXPEKK® Bioflex™通过智能材料和既定设计技术的结合,为骨科原始设备制造商引入了一种新的动态工具。OXPEKK® Bioflex™可提供1-10毫米至60厘米见方的定向层压板,半成品热成型3D零件喷水切割和热成型定向板和固体单向棒。共取向包括交叉层(0/90)、单向、准各向同性(-45/0/45/90)、扭转层(-45/45)。零件可以很容易地在传统设备上加工,如用于其他碳纤维复合材料。OXPEKK® Bioflex™可用于签订供应协议的长期植入物。 OXPEKK ® BioFlex™ smart materials are composed of multiple layers of continuous carbon fibers and thermoplastic OXPEKK® resin. The fibers are orientated within the part, so that sitffness is defined by firber direction. The isotropic nature of metallic and conventional polymeric materials are overcome, thus opening a new era of dynamic stabilization and motion preservation. To date orthopedic implant design engineers have relied upon complex mechanical assemblies and articulting surfaces in order to preserve motion. OXPEKK® Bioflex™ introduces a new and dynamic tool for the orthopedic OEM's via the combination of smart materials and established design techniques. OXPEKK® Bioflex™ can be supplied in oriented laminated plates of thickness 1 - 10mm up to 60cm square, semi-finished thermoformed 3D parts waterjet cut and hot-formed from oriented plates and solid unidirectional rods. Common orientations include Cross-Ply (0/90), Unidirectional, Quasi-Isotropic (-45/0/45/90), Torsional-Ply (-45/45). Parts can be readily machined on conventional equipment such as is used for other carbon fiber composites. OXPEKK® Bioflex™ is available for long-term implants with an executed supply agreement. |
技术参数 Technical Data | |||
---|---|---|---|
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
ASTM D638 | ||
-- -- 2 |
146000 | MPa | ASTM D638 |
-- -- 3 |
10700 | MPa | ASTM D638 |
拉伸强度 tensile strength |
ASTM D638 | ||
-- -- 2 |
2510 | MPa | ASTM D638 |
-- -- 3 |
57.0 | MPa | ASTM D638 |
-- -- 4 |
398 | MPa | ASTM D638 |
压缩模量 Compression modulus |
ASTM D695 | ||
-- -- 5 |
MPa | ASTM D695 | |
-- -- 6 |
MPa | ASTM D695 | |
压缩强度 compressive strength |
ASTM D695 | ||
-- -- 6 |
MPa | ASTM D695 | |
-- -- 5 |
MPa | ASTM D695 | |
-- -- 4 |
MPa | ASTM D695 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 90° Tensile |
3 0° Tensile |
4 Open Hole |
5 90° Compressive |
6 0° Compressive |
【新闻资讯】查看全部
山西:今年底新材料产业产值力争突破2000亿元
2022-03-15 近日,山西工业和信息化厅发布的《山西省新材料产业集群打造2022年行动计划》提出,到今年底总产值力争达到或突破2000亿元。 山西省今年重点推动68户企业72个优势技改项目建设,项 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |