牌号简介 About |
---|
Ketron® CM HPV PEEK是一种聚醚醚酮(PEEK)产品,含有的填充物为teflon® ptfe、石墨纤维增强材料 和 碳纤维增强材料。 它可以通过压缩模塑进行加工,在北美洲有供货。 典型应用领域为:工程/工业配件。 特性包括: 阻燃/额定火焰 耐化学品 Excellent chemical resistance Very low moisture absorption Inherently good wear and abrasion resistance Unaffected by continuous exposure to hot water or steam |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.44 | g/cm³ | ASTM D792 |
吸水率 Water absorption rate |
|||
24hr 24hr |
0.070 | % | ASTM D570 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
3650 | MPa | ASTM D638 |
拉伸强度 tensile strength |
|||
极限 limit |
54.5 | MPa | ASTM D638 |
拉伸应变 Tensile strain |
|||
断裂 fracture |
2.0 | % | ASTM D638 |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
弯曲强度 bending strength |
|||
屈服 yield |
MPa | ASTM D790 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
J/m | ASTM D256-A | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648 | |
最高使用温度 Maximum operating temperature |
|||
Long Term,Air Long Term,Air |
℃ | ||
线性热膨胀系数 Linear coefficient of thermal expansion 1 |
|||
MD:-40~149℃ MD:-40~149℃ 1 |
1/℃ | ASTM E831 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity 2 |
ohms | 内部方法 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
3.18 mm,Estimated Rating 3.18 mm,Estimated Rating |
UL 94 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 68°F |
3 EOS/ESD S11.11 |
【新闻资讯】查看全部
回天新材与华中科技大学签署三合作协议
2021-05-13 搜料网资讯: 5月10日,回天新材-华 中科 技大学粘接密封新材料联合研发中心第二轮项目交流会在华中科技大学举行,回天新材董事长章锋、华中科技大学副校长解孝林、化学与化工学 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |