牌号简介 About |
---|
Tecnoflon for TF 636是一种中-低粘度固化型含氟弹性体三元共聚物,旨在改善低温特性。Tecnoflon® FOR TF 636表现出与Tecnoflon共聚物相同的优异耐热性和耐化学性。Tecnoflon for TF 636的一些基本特性是:改进的低温性能、良好的耐热性和耐化学性、极低的压缩永久变形、优异的模具释放、无模具污染、优越的模具流动性。Tecnoflon for TF 636可用于O型环、隔膜、垫圈、密封件、成型的压缩、注射和传递成型。形状或其他需要改进低温性能的物品。Tecnoflon for TF 636可与固化系统和其他典型氟弹性体复合成分结合使用。混合可以通过两个辊磨机或内部搅拌机完成。用于TF 636的Tecnoflon可挤压成软管或型材,并可压延以制作板材或带料。制成品可采用多种橡胶加工方法生产。处理和安全应采取正常的护理和预防措施,以避免皮肤接触、眼睛接触和吸入烟雾。工作区域禁止吸烟。吃饭或吸烟前洗手。有关完整的健康和安全信息,请参阅材料安全数据表。 TECNOFLON® FOR TF 636 is a medium-low viscosity cure incorporated fluoroelastomer terpolymer designed to provide improved low temperature characteristics. Tecnoflon® FOR TF 636 exhibits the same excellent heat and chemical resistance expected from Tecnoflon® copolymers. Some of the basic properties of TECNOFLON® FOR TF 636 are: Improved low temperature performance Good heat and chemical resistance Very low compression set Excellent mould release Lack of mould fouling Superior mould flow Tecnoflon ® FOR TF 636 can be used for compression, injection and transfer molding of O-rings, diaphragms, gaskets, seals, moulded shapes or other items requiring improved low temperature performance. Tecnoflon ® FOR TF 636 can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two roll mills or internal mixers. Tecnoflon ® FOR TF 636 can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods. Handling and safety Normal care and precautions should be taken to avoid skin contact, eye contact and breathing of fumes. Smoking is prohibited in working areas. Wash hands before eating or smoking. For complete health and safety information, please refer to the material safety data sheet. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density 2 |
1.81 | g/cm³ | ASTM D792 |
门尼粘度 Mooney viscosity |
ASTM D1646 | ||
ML 1+10,121℃ ML 1+10,121℃ 2 |
31 | MU | ASTM D1646 |
ML 1+10,121℃ ML 1+10,121℃ 3 |
61 | MU | ASTM D1646 |
氟含量 Fluorine content 2 |
66 | % | 内部方法 |
可溶性 solubility 2 |
酮类和酯类 | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness 4 |
|||
邵氏 A Shaw's A 4 |
ASTM D2240 | ||
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength 6 , 4 |
MPa | ASTM D412 | |
100% 应变 100% strain 5 , 4 |
MPa | ASTM D412 | |
拉伸应变 Tensile strain 5 , 4 |
|||
断裂 fracture 5 , 4 |
% | ASTM D412 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
温度回复特性 Temperature recovery characteristics |
ASTM D1329 | ||
TR10 TR10 |
℃ | ASTM D1329 | |
TR30 TR30 |
℃ | ASTM D1329 | |
TR50 TR50 |
℃ | ASTM D1329 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
MDR 6 分钟,177℃,弧度 0.5° MDR 6 minutes, 177 ℃, 0.5 ° arc |
ASTM D6601 | ||
t'50 t'50 |
min | ASTM D6601 | |
t'90 t'90 |
min | ASTM D6601 | |
ts2 ts2 |
min | ASTM D6601 | |
最大转矩 Maximum torque |
N·m | ASTM D6601 | |
最小转矩 Minimum torque |
N·m | ASTM D6601 | |
MS 135℃ MS 135℃ |
ASTM D1646 | ||
MV MV |
MU | ASTM D1646 | |
t15 t15 |
min | ASTM D1646 | |
ODR 12 分钟,177℃,弧度 3° ODR 12 minutes, 177 ℃, radian 3 ° |
ASTM D2084 | ||
t'90 t'90 |
min | ASTM D2084 | |
ts2 ts2 |
min | ASTM D2084 | |
最大转矩 Maximum torque |
N·m | ASTM D2084 | |
最小转矩 Minimum torque |
N·m | ASTM D2084 | |
测试化合物 Test compound |
|||
Ca(OH)2 Ca(OH)2 |
% | ||
MgO – DE MgO – DE |
% | ||
N-990 MT 炭黑 N-990 MT carbon black |
% | ||
Tecnoflon® FOR TF 636 Tecnoflon® FOR TF 636 |
% |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 聚合物原料 |
3 测试物 |
4 C 模具 |
5 固化压力: 170 °C,10分钟; 后固化250 °C, (8+16)小时 |
6 口模 C |
【新闻资讯】查看全部
保定塑料模具基地为京津冀一体化建立做奉献
2016-04-13 保定清苑区是我国塑料模具工业的名地,这几十年中重诺言,讲诚信,立品牌。清苑塑料模具工业的开展于其开展环境、资金、技能、工业计划、品牌培育等方面是亲近相连的,我国其他的模具工业基地,能够学习学习清苑模具工业的开展形式,推进本区的模具工业开展。生产塑料模盒,护坡模具,沟盖板模具,六角护坡模具,路缘石模具,铁路护坡模具,步道砖模具,电缆槽模具,凹形槽模具。 我国的模具产物无论是质量仍是产能水平都得到了大幅的进步,我国的模具工业在世界处于中偏上的水平,可是我国的模具工业之世界上的位 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |