牌号简介 About |
---|
Glastic® 1872是一种防区外绝缘体,由UL认可的阻燃玻璃纤维增强热固性聚酯模塑料制成。Glastic® 1872的特点是耐碎性和更接近的高度公差比常见的瓷绝缘体。Glastic® 1872的耐湿热性能高于传统塑料绝缘体。 Glastic 1872 is a standoff insulator that is molded of UL recognized flame resistant fiberglass-reinforced thermoset polyester molding compound. Glastic 1872 features shatter resistance and closer height tolerances than commonly available in porcelain insulators. Moisture and heat resistance properties of Glastic 1872 are higher than those of conventional plastic insulators. |
技术参数 Technical Data | |||
---|---|---|---|
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
抗压性 Compression resistance |
11300 | kg | |
拉伸强度 tensile strength |
2500 | lbs | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
耗散因数 Dissipation factor |
|||
耐电弧性 Arc resistance |
180 | sec | ASTM D495 |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
|||
|
- | V-0 | UL 94 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
新力模具采用震雄二板机为高端医疗设备试模消费
2016-08-12 近期,佛山市顺德区新力模具塑料有限公司为西门子品牌生产商制造了一套生产“磁共振医疗检查扫描仪”主机外壳的大型模具,并特别选择一台震雄超霸SM 2600-TP-SVP/2伺服驱动二板大型注塑机用于试模生产。 该磁共振医疗扫描仪外壳模具高2,100mm、宽1,900mm、厚930mm,整个试模过程,从安装好模具到启动自动调模程序把机器调整到最佳参数只花了很短的时间,此台SM 2600-TP-SVP/2注塑机从试模第四模开始便稳定地生产出合格塑料制品。 由于震雄二 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |