牌号简介 About |
---|
Moplen EP332c Moplen EP332C是PMC根据Basell的许可使用Spheripol工艺生产的聚丙烯嵌段共聚物。Moplen EP332C是一种嵌段共聚物,在工业板材和无压管道市场上受到客户的欢迎。Moplen EP332C树脂符合21 CFR 177.1520联邦法规中关于食品接触的FDA要求。MOPLEN EP332C Moplen EP332C是一种通过Spheripol工艺生产的聚丙烯抗冲击共聚物,不适用于医疗和医药应用。适用于挤压法加工。 Moplen EP332C Moplen EP332C is the polypropylene block copolymer manufactured by PMC under the license of BASELL using the Spheripol process. Moplen EP332C is a block copolymer appreciated by customers in the market for industrial sheet, and non-pressurized pipes. Moplen EP332C resin meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact. It is not intended for medical and pharmaceutical applications. Moplen EP332C Moplen EP332C is a polypropylene impact Copolymer with high impact, high stiffness, good heat resistance. Typical customer applications are Industrial Sheet and Non-pressurized pipes . |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.900 | g/cm³ | ASTM D1505 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
0.35 | g/10min | ASTM D1238 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
ASTM D256 | ||
-20℃,注塑成型 -20 ℃, injection molding |
69 | J/m | ASTM D256 |
23℃,注塑成型 23 ℃, injection molding |
无断裂 | ASTM D256 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
维卡软化温度 Vicat Softening Temp |
150 | ℃ | ASTM D1525 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
|||
R 级 R-level |
ASTM D785 | ||
拉伸强度 tensile strength |
|||
屈服,注塑成型 Yield, injection molding |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
屈服,注塑成型 Yield, injection molding |
% | ASTM D638 | |
弯曲模量 Bending modulus |
|||
注塑成型 injection molding |
MPa | ASTM D790 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
塑料精细注射成型工艺引见
2018-09-30 1、精密注射成型的概念 精密注塑是指加工成型的注塑制品的尺寸重复精度很高,以致使用通用注塑机、常规的注塑成型工艺难以达到要求的一种注射成型方法。 “精密注射成型”这一概念,主要是区别于“常规注射成型”,它是基于高分子材料的迅速发展, 在仪表、电子领域里采用精密塑料部件取代高精度的金属零件的技术。目前针对精密注射制品的界定指标有两个:一是制品尺寸重复精度, 二是制品质量的重复精度。本文主要从制 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |