牌号简介 About |
---|
透明、乙醚基注塑和挤压型特点:整个结构具有永久性抗静电性能-与特定环境条件无关。可单独着色,符合FDA标准:适用于食品接触,不含PVC和乳胶。应用:电气和电子工业中的元件易燃液体薄膜的管道和容器、输送和通风管道、管道、化学工业传感器的应用 Transparent, ether-based injection moulding and extrusion type Characteristics: Permanent antistatic properties throughout the whole structure - independent of specific environmental conditions.Can be individually colourd, FDA compliant: suitable for food contact, free of PVC and latex. Applications: Components in the electrical and electronic industry tubes and containers for flammable liquids films, delivery and ventilation pipes, tubes, applications in the chemical industry Sensors |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.20 | g/cm³ | ISO 1183/A |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity |
< 1.0E+9 | ohms | IEC 60093 |
体积电阻率 Volume resistivity |
1.9E+9 | ohms·cm | IEC 60093 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
85 | ISO 868 | |
拉伸强度 tensile strength 2 |
DIN 53504 | ||
-- -- |
38.5 | MPa | DIN 53504 |
10% 应变 10% strain |
MPa | DIN 53504 | |
50% 应变 50% strain |
MPa | DIN 53504 | |
100% 应变 100% strain |
MPa | DIN 53504 | |
拉伸应变 Tensile strain 2 |
|||
断裂 fracture 2 |
% | DIN 53504 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 7.9 in/min |
【新闻资讯】查看全部
曹俭在中塑协硬质PVC发泡制品专委会15年会上的讲话
2015-12-28 中国塑料加工工业协会常务副理事长 曹俭 尊敬的各位领导、各位专家教授、企业家们 尊敬的各位新老朋友:大家上午好! 非常高兴来到美丽的海滨城市-青岛市胶州湾,参加中国塑协硬质PVC发泡制品专委会2015年年会暨技术交流会,本次会议是在塑料行业乃至整个国家经济处于转型升级的关键时期、是“十二五”即将完成,“十三五”即将开始实施的重要时刻召开的一次行业重要会议。首先我代表中国塑料加工工业协会向出席会议的各位领导、各位专家、各位企业家、各位代表表示热 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |