牌号简介 About |
---|
特性:中等粘度基本产品应用:单丝、刷毛和牙刷的高回收率。其在热变形温度(熔点高出近40°C)下的优势超过了PA 12。拉伸和弯曲强度在高湿强度下的突出回收率。PA 612是一种高回收率的复合材料。因此,stamid d系列代表了特殊产品,补充了Vestamid L系列PA 12化合物的综合选择。 Characterization: medium-viscosity base product Applications: monofilaments, bristles with high recovery for paint brushes and tooth brushes Its advantages over PA 12 exhibit in the heat deflection temperature (melting point nearly 40 °C higher) tensile and flexural strength outstanding recovery at high wet strength The PA 612 compounds of the VESTAMID® D series consequently represent specialty products that complement the comprehensive selection of PA 12 compounds of the VESTAMID® L series. |
产品描述 Product Description
用途:单丝;
颜色:黑色,自然色
加工条件:注射成型 Injection Molding
性能特点: 防火阻燃等级HB; 耐磨; 耐油; 耐化学性; 食品接触; 冲击性能好; 抗应力开裂; 耐燃油; High impact resistance,Food contact compliance,Good wear resistance,Grease resistance,Solvent resistance,High ESCR,Fuel resistance,HB
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.06 | g/cm³ | ISO 1183 |
收缩率 Shrinkage rate 2 |
ISO 294-4 | ||
TD TD |
1.1 | % | ISO 294-4 |
MD MD |
1.3 | % | ISO 294-4 |
吸水率 Water absorption rate |
|||
饱和,23℃ Saturation, 23 ℃ |
2.7 | % | ISO 62 |
平衡,23℃,50% RH Equilibrium, 23 ℃, 50% RH |
1.0 | % | ISO 62 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
MPa | ISO 527-2/1A | |
拉伸强度 tensile strength |
|||
屈服 yield |
MPa | ISO 527-2/1A | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ISO 527-2/1A | |
屈服 yield |
% | ISO 527-2/1A | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
ISO 179/1eA | ||
-30℃,完全断裂 -30 ℃, completely fractured |
kJ/m² | ISO 179/1eA | |
23℃,完全断裂 23 ℃, completely fractured |
kJ/m² | ISO 179/1eA | |
简支梁无缺口冲击强度 Charpy Unnotch Impact strength |
ISO 179/1eU | ||
-30℃ -30℃ |
ISO 179/1eU | ||
23℃ 23℃ |
ISO 179/1eU | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
ISO 75-2/B | ||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ISO 75-2/B | |
0.45 MPa,未退火 0.45 MPa, unannealed 3 |
℃ | ISO 75-2/B | |
热变形温度 Hot deformation temperature |
ISO 75-2/A | ||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ISO 75-2/A | |
1.8 MPa,未退火 1.8 MPa, unannealed 7 |
℃ | ISO 75-2/A | |
维卡软化温度 Vicat Softening Temp |
℃ | ISO 306/B | |
熔融温度 Melting temperature 5 |
℃ | ISO 11357-3 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD:23~55℃ MD:23~55℃ |
1/℃ | ISO 11359-2 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
介电强度 Dielectric strength |
kV/mm | IEC 60243-1 | |
相对电容率 Relative permittivity |
IEC 60250 | ||
100 Hz 100 Hz |
IEC 60250 | ||
1 MHz 1 MHz |
IEC 60250 | ||
耗散因数 Dissipation factor |
IEC 60250 | ||
100 Hz 100 Hz |
IEC 60250 | ||
1 MHz 1 MHz |
IEC 60250 | ||
相比漏电起痕指数 Compared to the leakage tracing index 5 |
|||
解决方案 A Solution A |
V | IEC 60112 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
UL 94 | ||
1.60 mm 1.60 mm |
UL 94 | ||
3.20 mm 3.20 mm |
UL 94 | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
电解腐蚀 Electrolytic corrosion |
IEC 60426 | ||
ISO Shortname ISO Shortname |
ISO 1874 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 specimen 127x12.7x3.2 mm processing acc. to ISO 1874-2 |
3 after conditioning at 180 °C / 60 min |
4 2nd Heating |
5 50 drops Value |
【新闻资讯】查看全部
河南省塑料协会受邀参加“2020年中国生物基材料产业技术发展大会”
2020-09-05 搜料网资讯:8月26-27日,2020年中国(濮阳南乐)生物基材料产业技术发展大会在中华龙乡河南濮阳胜利召开,河南省塑料协会段同生会长、谷金河副会长、窦俊岭秘书长等领导受邀参会 |