牌号简介 About |
---|
Lytex 4175是一种环氧基连续单向碳纤维增强片状模塑料(SMC)。Lytex 4175建议用于要求快速压缩成型工艺速度以及连续单向碳纤维机械性能的应用。Lytex 4175使用与Lytex 9063相同的树脂基体,可以使用常规设备进行成型。 Lytex 4175 is an epoxy matrix, continuous unidirectional carbon fiber reinforced, sheet molding compound (SMC). Lytex 4175 is suggested for applications where the fast process speed of compression molding is desired along with the mechanical properties of a continuous unidirectional carbon fiber. Lytex 4175 uses the same resin matrix as Lytex 9063 and can be molded using conventional equipment. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.49 | g/cm³ | ASTM D792 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
110000 | MPa | ASTM D638 |
拉伸强度 tensile strength |
1240 | MPa | ASTM D638 |
弯曲模量 Bending modulus |
8200 | MPa | ASTM D790 |
弯曲强度 bending strength |
1170 | MPa | ASTM D790 |
压缩模量 Compression modulus |
MPa | ASTM D695 | |
压缩强度 compressive strength |
MPa | ASTM D695 | |
剪切模量 shear modulus |
MPa | ASTM D732 | |
剪切强度 shear strength |
MPa | ASTM D732 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
J/m | ASTM D256 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
贮藏期限 Storage period |
|||
-18℃ -18℃ |
wk | ||
脱模时间 stripping time |
|||
138℃ 138℃ |
min |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
石墨烯集成相机,可以看到看不见的
2017-06-13 在过去的40年中,由于采用硅和CMOS(互补金属氧化物半导体)技术,微电子已经跨越式发展,使得可能的计算,智能手机,紧凑型和低成本数码相机以及大多数电子产品依靠今天。 然而, |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |