牌号简介 About |
---|
提供广泛的可塑性和优越的成本性能,并扩大设计的可能性。京瓷化工的酚类成型化合物“Tecolite”可以实现高周期成型,并在气缸内具有良好的稳定性。另外,“Tecolite”具有较宽的成型条件,容易被发现。在零件中,“Tecolite”具有较小的模具收缩系数,因此适用于精密零件。尤其适用于非熔丝断路器、各种电器零件、厨房零件等批量生产的零件。 Provides wide range moldability and Superior cost performance and Expands the possibility of design. Kyocera Chemical's Phenolic Molding Compounds "TECOLITE" can possible to high cycle molding and excellent stability within a cylinder. Moreover, "TECOLITE" have a wide molding condition and can be found out easily. In the parts, "TECOLITE" have small mold shrinkage factor therefore it is suitable for precision parts. It is especially the best for mass-production parts, such as a non-fuse breaker, various electric parts, and kitchen parts, etc. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.43 | g/cm³ | |
收缩率 Shrinkage rate |
|||
MD MD 3 |
0.70 到 0.90 | % | |
MD MD 4 |
1.2 到 1.4 | % | |
TD TD 4 |
0.90 到 1.1 | % | |
吸水率 Water absorption rate |
|||
平衡 balance |
< 0.35 | % | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
弯曲强度 bending strength |
MPa | ||
压缩强度 compressive strength |
MPa | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
℃ | ||
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
介电强度 Dielectric strength |
kV/mm | ||
绝缘电阻 insulation resistance |
|||
沸腾后 After boiling |
ohms | ||
As Molded As Molded |
ohms | ||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
0.51 mm 0.51 mm |
UL 94 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Injection Molding |
3 Compression Molding |
【新闻资讯】查看全部
2018年化学原料和制品制造业投资增长6%
2019-01-22 国家统计局1月21日公布的数据显示,2018年1-12月,全国固定资产投资635636亿元,比上年增长5.9%。其中,民间固定资产投资394051亿元,比上年增长8.7%,增速比上年提高2.7个百分点。 在制 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |