牌号简介 About |
---|
Addisil™ 6210硅酮粘合剂是一种单组分热固化硅酮密封胶,它可以在没有底漆的情况下粘合到许多基材上,并在高温下快速固化。本产品在室温下工作时间很长,在高温下才能完全固化。Addisil™ 6210是一种灰白色单组分触变材料。主要特点和优点单组分产品-无需混合,室温储存,高温快速固化(140°C至230°C范围内),与多种基材(如玻璃、搪瓷、铝、陶瓷)无底漆粘合,无固化副产品,对金属无腐蚀性,在宽温下性能良好。工作温度-50°C至200°C Addisil 6210 silicone adhesive is a one-component heat curable silicone adhesive sealant which will bond to many substrates without a primer and which will cure rapidly at elevated temperatures. This product has a very long working time at room temperature and will not cure completely until exposed to elevated temperatures. Addisil 6210 is an off white one component thixotropic material. Key Features and Benefits One component product - no mixing required Room temperature storage Fast cure at elevated temperature (in a range of 140°C to 230°C) Primerless adhesion to many types of substrates (e.g. glass, enamel, aluminium, ceramic) No formation of cure by-products Non-corrosive to metals Good performance over a wide temperature range Service temperature -50°C to 200°C |
技术参数 Technical Data | |||
---|---|---|---|
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
贮藏期限 Storage period |
|||
< 27℃ < 27℃ |
> 17 | wk | |
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.21 | g/cm³ | |
粘度 viscosity |
160 到 360 | Pa·s | |
固化时间 Curing time |
|||
200℃ 200℃ |
8.3E-3 | hr | |
175℃ 175℃ |
< 0.033 | hr | |
150℃ 150℃ |
hr | ||
Cured Properties Cured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
|||
拉伸强度 tensile strength |
MPa | ||
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ||
撕裂强度 tear strength |
kN/m |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
德国纺织技术研讨所将在复合资料欧洲展上大放异彩
2017-09-11 图片显示了:复丝缠绕制成的复丝压力容器 位于德国亚琛工业大学的纺织技术研究所(ITA)计划在“复合材料欧洲展“上展示一系列产品。 这一系列产品中包 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |