牌号简介 About |
---|
我们的TPU“Mirakutoran”具有以下突出特点。具有优异的耐磨抗张强度、较高的机械强度和撕裂强度,是一种硬度范围广、耐冲击强度高、耐油、耐化学性好、低温性能优异、耐候性好、耐臭氧性好、弹性好、振动消声效果好等优点的橡胶。聚氨酯弹性体热塑性塑料,即重放性较强的可加工硫化工艺,无需固化反应,极高产率树脂等易溶解的聚合物,在溶剂法中易溶解,米拉库托兰的标准型有E型和P型两种。E型分子具有一定的交联结构,具有优良的机械强度和压缩永久变形能力。P型具有良好的流动性线性结构。 Our TPU "Mirakutoran ®" has the following outstanding features. Has excellent wear resistance Tensile strength, high mechanical strength and tear strength Is a wide range of hardness High impact strength Oil resistance and good chemical resistance Excellent low temperature properties, weather resistance, ozone resistance and is also good Flexible rubber elastic, vibration-effective silencing Compared to other urethane elastomer thermoplastic that is more Playback can be processed Vulcanization process without curing reaction, very high productivity Resins and other polymer is easy Solution is easily dissolved in solvent process Mirakutoran to the standard type E and P are two types. Type E has a certain cross-linked structure in the molecule, and excellent mechanical strength and compression set. P type is characterized by good liquidity linear structure |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.12 | g/cm³ | ASTM D792 |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength 2 |
|||
屈服,23℃,2 mm Yield, 23 ℃, 2 mm 2 |
54.0 | MPa | ASTM D412 |
100% 应变,23℃,2 mm 100% strain, 23 ℃, 2 mm 2 |
25.0 | MPa | ASTM D412 |
拉伸应变 Tensile strain 2 |
|||
断裂,23℃,2 mm Fracture, 23 ℃, 2 mm 2 |
400 | % | ASTM D412 |
撕裂强度 tear strength 2 |
|||
23℃,2.00 mm 23℃,2.00 mm 2 |
226 | kN/m | ASTM D624 |
压缩形变 Compression deformation |
|||
70℃,22 hr 70℃,22 hr |
% | ASTM D395 | |
回弹性 Resilience |
|||
23℃,2.00 mm 23℃,2.00 mm |
|||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
维卡软化温度 Vicat Softening Temp |
℃ | ASTM D1525 3 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D,23℃,2.00 mm,注塑成型 Shore D, 23 ℃, 2.00 mm, injection molding |
ASTM D2240 | ||
泰伯耐磨性 Taber abraser |
|||
23℃,1000 周期,1000 g,H-22 转轮 23 ℃, 1000 cycles, 1000 g, H-22 wheel |
mg | ASTM D1044 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 12 in/min |
3 压 力1 (10N) |
【新闻资讯】查看全部
脱模剂在RIM工艺中的运用
2016-04-20 由于聚氨酯对金属等材料的黏附性较强,生产聚氨酯模塑制品时一般需用脱模剂,RIM工艺也不例外。RIM工艺的脱模剂有外脱模剂和内脱模剂两类。 目前常用的外脱模剂是石蜡和有机硅脱模剂。可配成溶液,便于经济地涂覆模具。也可使用聚乙烯蜡的2%一10%烃类溶液作汽车保险杠等RIM聚氨酯材料的外脱模剂。如果制件有涂漆要求。需慎用有机硅系脱模剂,否则可引起不能整体涂覆。 为了适应提高生产效率的要求,内脱模剂作为RIM聚氨酯(脲)的重要助剂被开发。内脱模剂是加到配方中的起脱模 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |