牌号简介 About |
---|
Versaflex™ OM 3060-1 是一种透明的重叠模塑材料,设计用于粘接多种基体材料。 新产品。还未建立商业规范。 与 PC、ABS、PC/ABS、PC/PETG 和 PC/PBT 的粘接性极强 感觉类似于橡胶 手感柔软 Versaflex™ OM 3060-1 is a clear, medical compliant overmold designed to adhere to multiple substrates. Excellent bond to PC, ABS, PC/ABS, PC/PETG, and PC/PBT Rubber Feel Soft Touch |
技术参数 Technical Data | |||
---|---|---|---|
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A,10 秒,23℃ Shore A, 10 seconds, 23 ℃ |
59 | ASTM D2240 | |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength 4 , 5 |
|||
断裂,23℃ Fracture, 23 ℃ 4 , 5 |
4.50 | MPa | ASTM D412 |
300% 应变,23℃ 300%应变,23℃ 4 , 5 |
3.39 | MPa | ASTM D412 |
拉伸应变 Tensile strain 4 , 5 |
|||
断裂,23℃ Fracture, 23 ℃ 4 , 5 |
560 | % | ASTM D412 |
撕裂强度 tear strength |
31.5 | kN/m | ASTM D624 |
压缩形变 Compression deformation |
|||
23℃,22 hr 23℃,22 hr |
% | ASTM D395B | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
|||
1.50 mm 1.50 mm |
UL 94 | ||
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
g/cm³ | ASTM D792 | |
收缩率 Shrinkage rate |
|||
MD MD |
% | ASTM D955 | |
熔体表观粘度 Apparent viscosity of melt |
|||
200℃,11200 sec^-1 200℃,11200 sec^-1 |
Pa·s | ASTM D3835 |
备注 |
---|
1 Please contact PolyOne GLS Thermoplastic Elastomers for a complete copy of the GLS Healthcare Policy. 1. The Customer must notify GLS of any FDA Class I and/or European Union Class I medical devices for each specific product and application. 2. The Customer shall not knowingly manufacture, use, sell or otherwise supply, directly or indirectly products or compounds made from GLS products in any of the following without prior written approval by GLS for each specific product or application: a. Cosmetics b. Drugs and other Pharmaceuticals c. Temporary or permanent implantation in the human body, regardless of the intended duration of implantation d. Class II and Class III Medical Devices as defined in 21 CFR 860.3 ("Medical Devices") e. Class IIa, IIb and III as defined in Directive 93/42/EEC |
2 一般属性:这些不能被视为规格。 |
3 C 模具 |
4 2 小时 |
【新闻资讯】查看全部
POM:惯性上涨or另有隐情?
2020-11-18 搜料网资讯: 经历了金九银十的旺季,塑料市场红火的势头似乎还意犹未尽!尤其是工程塑料,在PC老大哥的带领下,各大种类原料上演了一出你方唱罢我登场的戏码,且似乎仍未停歇 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |