牌号简介 About |
---|
Isplen Pb 131 N5e是专为挤出应用而设计的具有中-低流动性的异相共聚物。它具有良好的加工性能和较高的机械性能,尤其是在低温下也具有较高的冲击强度。isplen pb 131 n5e可以在挤出过程中使用合适的颜料很容易着色,最好是以比基聚合物具有更高熔体流动速率的浓缩物的形式。它具有很高的抗冲击性。在挤出和吹塑工艺中的典型应用,例如:表面光泽好、耐冲击性高的薄膜和片材。推荐的熔融温度范围为190至250°C。应为每条生产线优化加工条件。ISPLEN PB131N5E是一种高熔体粘度的丙烯异相共聚物。该材料具有良好的流动性和优异的力学性能,适合加工成单层波纹管。由于其在低温下的高冲击强度是专门用于保护电缆管道的,因此在挤压过程中,可以使用合适的颜料(最好是以比基聚合物具有更高熔融流速的浓缩物的形式)轻松着色。用于保护电缆管道的单层波纹管的典型应用推荐的熔化温度范围为205至225°C。应为每条生产线优化加工条件。 ISPLEN® PB 131 N5E is a heterophasic copolymer with medium-low fluidity designed for extrusion applications. It has good processability and high mechanical properties especially high impact strength, even at low temperatures. ISPLEN® PB 131 N5E can be easily coloured during the extrusion process using the right pigments, preferably in the form of concentrates with a higher melt flow rate than the base polymer. It has a very high impact resistance. TYPICAL APPLICATIONS In extrusion and blow-moulding processes, such as: Films and sheets with a good surface gloss and high impact resistance Pipes Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line. ISPLEN® PB131N5E is a propylene heterophasic copolymer with high melt viscosity. The good flow and outstanding mechanical properties make this material suitable to be processed into monolayer corrugated pipes. Due to its high impact strength at low temperatures is specially intended for protecting cable conduits It can be easily coloured during the extrusion process using the right pigments, preferably in the form of concentrates with a higher melt flow rate than the base polymer. TYPICAL APPLICATIONS Monolayer corrugated pipes for protecting cable conduits Recommended melt temperature range from 205 to 225 °C. Processing conditions should be optimised for each production line. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.903 | g/cm³ | ISO 1183 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
1.10 | g/10min | ISO 1133 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
170 | kJ/m² | ISO 180-1A |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
100 | kj/m² | ISO 180-1A |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
77 | R 级 | ISO 2039-2 |
拉伸强度 tensile strength |
|||
23℃ 23℃ |
MPa | ISO 527-2 | |
拉伸应变 Tensile strain |
|||
断裂,23℃ Fracture, 23 ℃ |
% | ISO 527-2 | |
弯曲模量 Bending modulus |
|||
23℃ 23℃ |
MPa | ISO 178 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
3D打印给模具行业带来的“喜”与“忧”
2016-09-07 模具行业是一个跨度最大的行业,它与制造业的各个领域都发生关系。在现代社会,制造和模具是高度依存的,无数产品的部件都要通过模制(注射、吹塑和硅胶)或铸模(熔模、翻砂和旋压)来制造。无论什么应用,制造模具都能在提高效率和利润的同时保证质量。 CNC加工是在制造模具时最常用的技术。虽然它能够提供高度可靠的结果,但同时也非常昂贵和费时。所以很多模具制造企业也开始寻找更加有效的替代方式。而通过增材层制造制作模具也就成了一个更加具有吸引力的方法,特别是因为模具一般都属于小批量生产而且形 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |