牌号简介 About |
---|
T50-4400-119是一种高流量、高密度聚乙烯共聚物,用于薄壁容器的高速注塑成型。这种材料可减少循环时间,同时仍能提供合理的冲击强度。该树脂符合美国食品药品监督管理局21CFR 177.1520的要求。 T50-4400-119 is a high-flow, high density polyethylene copolymer intended for high speed injection molding of thin wall containers. This material will allow for cycle time reduction while still imparting reasonable impact strength. This resin meets the Food and Drug Administration requirements of 21CFR 177.1520. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.951 | g/cm³ | ASTM D4883 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,2.16kg 190℃,2.16kg |
44 | g/10min | ASTM D1238 |
抗环境应力开裂 ESCR(Environmental Stress Cracking Resistance) |
|||
100%非离子洗涤剂,F50 100% non-ionic detergent, F50 |
1.00 | hr | ASTM D1693B |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
63 | ASTM D2240 | |
拉伸强度 tensile strength 2 |
|||
断裂 fracture 2 |
26.2 | MPa | ASTM D638 |
屈服 yield 2 |
MPa | ASTM D638 | |
拉伸应变 Tensile strain 2 |
|||
断裂 fracture 2 |
% | ASTM D638 | |
屈服 yield 2 |
% | ASTM D638 | |
弯曲模量 Bending modulus |
|||
正切 tangent |
MPa | ASTM D790-A | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃,Area 23℃,Area |
kJ/m² | ASTM D256 | |
23℃ 23℃ |
J/m | ASTM D256 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ASTM D648 | |
脆化温度 Embrittlement temperature |
℃ | ASTM D746 | |
维卡软化温度 Vicat Softening Temp |
℃ | ASTM D1525 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 2.0 in/min |
【新闻资讯】查看全部
PC电脑逆袭二季度增长1.5%,出货量为6300万台,联想勇夺桂冠
2019-07-22 研究公司Gartner数据,二季度PC市场小幅反弹,经过两个季度的下滑后,全球个人电脑PC的出货量在二季度增长了1.5%,出货量为6300万台,去年同期为6200万台。 同时,IDC也发布了自己的初 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |