牌号简介 About |
---|
TYNEP® E4308是一种聚对苯二甲酸乙二酯(PET)材料,含有的填充物为30% 玻璃纤维增强材料。 该产品在北美洲有供货,。 TYNEP® E4308的主要特性有: 冲击改性 耐冲击 TYNEP® E4308 is a Polyethylene Terephthalate (PET) material filled with 30% glass fiber. It is available in North America. Important attributes of TYNEP® E4308 are: Impact Modified Impact Resistant |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.22 | g/cm³ | ASTM D792 |
收缩率 Shrinkage rate |
|||
MD MD |
0.60 到 0.90 | % | ASTM D955 |
吸水率 Water absorption rate |
|||
24hr 24hr |
0.16 | % | ASTM D570 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
断裂 fracture |
159 | MPa | ASTM D638 |
拉伸应变 Tensile strain |
|||
屈服 yield |
2.0 | % | ASTM D638 |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
弯曲强度 bending strength |
MPa | ASTM D790 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
3.2mm 3.2mm |
J/m | ASTM D256 | |
悬臂梁无缺口冲击强度 Notched impact strength of cantilever beam |
|||
3.2 mm 3.2 mm |
J/m | ASTM D256 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
ASTM D648 | ||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ASTM D648 | |
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻率 Volume resistivity |
ohms·cm | ASTM D257 | |
介电强度 Dielectric strength |
|||
1.57 mm,在空气中 1.57 mm in air |
kV/mm | ASTM D149 | |
介电常数 Dielectric constant |
|||
1 MHz 1 MHz |
ASTM D150 | ||
耗散因数 Dissipation factor |
|||
1 MHz 1 MHz |
ASTM D150 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
关于奢华内饰:全真皮中控台能够是塑料的
2018-03-15 硬塑料、软真皮,对于讲究多的车主,买车当然首选真皮内饰,不仅手感好,还显档次。不过,广告里大幅宣传的座椅、实木内饰是真的吗?它们的真实价值如何? 我发现啊,一辆车豪 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |