牌号简介 About |
---|
应用真空输液模结构性能高耐热性低粘度好湿透性热固化 Applications Vacuum infusion Mould constructions Properties high heat resistance low viscosity good wet-out characteristics heat curing |
技术参数 Technical Data | |||
---|---|---|---|
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁无缺口冲击强度 Charpy Unnotch Impact strength |
28 到 42 | kJ/m² | ISO 179 |
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
|||
20℃ 20℃ |
1.09 到 1.13 | g/cm³ | |
粘度 viscosity |
|||
25℃ 25℃ |
0.30 到 0.50 | Pa·s | |
固化时间 Curing time |
|||
20℃ 20℃ |
24 到 48 | hr | |
储存稳定性 storage stability 2 |
|||
20 ℃ 20 ℃ 2 |
120 到 150 | min | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ISO 7619 | ||
弯曲模量 Bending modulus |
MPa | ISO 178 | |
弯曲强度 bending strength |
MPa | ISO 178 | |
压缩强度 compressive strength |
MPa | ISO 604 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ISO 75-2/B | |
玻璃化转变温度 Glass transition temperature |
℃ | DSC | |
热固组件 Thermosetting components |
|||
树脂 resin |
|||
硬化法 Hardening method |
|||
后固化时间 Post curing time |
|||
40℃ 40℃ |
hr | ||
60℃ 60℃ |
hr | ||
80℃ 80℃ |
hr | ||
100℃ 100℃ |
hr | ||
120℃ 120℃ |
hr | ||
150℃ 150℃ |
hr | ||
180℃ 180℃ |
hr |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 200 g |
【新闻资讯】查看全部
台湾奇美ABS POLYLAC® PA-747塑料物性表下载/价格走势图
2019-09-27 POLYLACPA-747是一种丙烯腈丁二烯苯乙烯(ABS)产品,。它,在北美洲、非洲和中东、拉丁美洲、欧洲或亚太地区有供货。典型应用领域为:汽车行业。特性包括:阻燃/额定火焰。 完整 PDF物性表下 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |