公司信息及水印
牌号简介 About |
---|
Bormed™ LE6609-PH是一种通过高压工艺生产的低密度聚乙烯。用于医药产品软包装和软包装的吹塑。该产品还可用于注塑和吹膜。由Bormed™ LE6609-PH制成的产品可以使用环氧乙烷、γ辐射、电子束辐射或蒸汽进行灭菌。灭菌蒸汽温度可高于110°C。应用:医药产品包装“吹填和密封”安瓿和瓶 Bormed LE6609-PH is a resin intended for evaluation for use in Healthcare applications. Bormed LE6609-PH is an additive free low density polyethylene typically used in blow moulding articles . Material is characterised with a balanced inflexibility to facilitate to collapsibility of containers. Bottles and ampoules made from Bormed LE6609PH can be steam sterilised at temperatures above 110 °C. Products made from Bormed LE6609-PH can be sterilised by using ethylene oxide or radiation up to 35 kGy. Applications Bormed LE6609-PH has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed LE6609-PH . Bottles for irrigation solutions Ampoules for injectable solutions Bottles for IV-solutions This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare. Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure. Special features No additives |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.930 | g/cm³ | ISO 1183 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,5.0kg 190℃,5.0kg |
0.30 | g/10min | ISO 1133 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D,注塑成型 Shaw's D, injection molding |
53 | ISO 868 | |
拉伸模量 Tensile modulus |
|||
注塑成型 injection molding |
350 | MPa | ISO 527-1-2 |
拉伸强度 tensile strength |
|||
屈服,注塑成型 Yield, injection molding |
14.0 | MPa | ISO 527-2/50 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ISO 75-2/B |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
站上赛场的中国品牌
2022-02-08 在北京2022年冬奥会开幕前,一组关于背包的照片在网络上火了起来多位曾经报道过2008年北京奥运会的记者,又背着当年的媒体包,回到了老家。据报道,不少外国记者表示,每逢大型 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |