牌号简介 About |
---|
SOLLAMID B 2700 MW 40含有聚酰胺6的所有优良特性。在没有露头加强和高各向同性的情况下,表现出良好的注入性能。用硅灰石对公式mw进行了增强,提高了表面光洁度和各向同性性能。由于索拉米德B 2700 mW40易于成型,因此其适用于优良的表面光洁度和油漆设施。大型结构件主要用于汽车等行业。 The SOLLAMID B 2700 MW 40 contain all the good characteristic properties of polyamide 6. Exhibits excellente behavior in injection without outcrop reinforcement and a high isotropy. The formulas MW are Reinforced with Wollastonita which improves the surface finish and Isotropy Properties. Applications Because of their ease in molding the Sollamid B 2700 MW 40 is suitable for excellent surface finish and paint facility. Large structural parts used mainly in the automotive sector and others too. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.46 | g/cm³ | ASTM D792 |
收缩率 Shrinkage rate |
|||
MD MD |
0.80-1.0 | % | ASTM D995 |
热稳定性 thermal stability |
90-100 | ℃ | |
吸水率 Water absorption rate |
|||
23℃,24hr 23℃,24hr |
0.90-1.0 | % | ASTM D570 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
185 | ℃ | ASTM D648 |
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648 | |
熔融温度 Melting temperature |
℃ | ||
维卡软化温度 Vicat Softening Temp |
|||
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻 Volumetric resistance |
Ω.cm | ASTM D257 | |
绝缘强度 Insulation strength |
|||
|
KV/mm | ASTM D149 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
|||
1.60mm 1.60mm |
UL 94 | ||
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
J/m | ASTM D256 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
R 级 | ASTM D785 | |
拉伸强度 tensile strength |
|||
23℃ 23℃ |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂,23℃ Fracture, 23 ℃ |
% | ASTM D638 | |
拉伸模量 Tensile modulus |
|||
23℃ 23℃ |
MPa | ASTM D638 | |
弯曲强度 bending strength |
|||
23℃ 23℃ |
MPa | ASTM D790 | |
弯曲模量 Bending modulus |
|||
23℃ 23℃ |
MPa | ASTM D790 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
巴斯夫的投资将推进中国3D打印行业开展
2018-11-07 2018年11月6日 ― 巴斯夫风险投资公司宣布将投资中国领先的3D打印流程与3D打印机生产商上海普利生机电科技有限公司(普利生),共同推动3D打印行业发展。普利生所研发的专利技术集合高速批量化打印、高精确度以及低成本等特性。巴斯夫的投资能够支持普利生加速产品开发及相关研发,以扩大市场影响,并有机会进入全球市场。 巴斯夫风险投资公司董事总经理Markus Solibieda表示:“这是我们针对中国企业的首个投资项目。普利生的开创性技术能提高大尺寸组件的稳定性,使得诸如医疗用 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |