牌号简介 About |
---|
成型挤出用普通硅橡胶具有优异的耐高温、耐低温、电气性能和物理机械性能。尽管透明度比普通硅橡胶稍差,但它更适合制造有色产品。本产品有两种,即改性成型硅橡胶和改性挤出硅橡胶。前者可用DMDBH硫化,用于制造键盘、密封圈、密封垫等工业附件;后者可用DCBP硫化,用于制造电线、电缆、胶管、橡胶带等。 Common grade for molding and extrusion This product has good physical and mechanical properties and processability. This product can be divided into two sub-categories: rubber for molding and rubber for extrusion. The rubber for molding is vulcanized with 2,5-Dimethyl-2,5-di(tert-butylperoxy)hexane as vulcanizator, applicable to manufacturing of industrial miscellaneous parts such as keypads, sealing rings and sealing gaskets; and the rubber for extrusion is vulcanized with vulcanizator DCBP (Di-(2,4-dichlorobenzoyl) Peroxide), applicable to manufacturing of various electric wires, cables, hoses and tapes. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.10 到 1.20 | g/cm³ | ASTM D1505 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
47 到 53 | ASTM D2240 | |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸永久变形 Tensile permanent deformation |
< 8 | % | ASTM D412 |
拉伸强度 tensile strength |
|||
屈服 yield |
> 7.50 | MPa | ASTM D412 |
拉伸应变 Tensile strain |
|||
断裂 fracture |
> 320 | % | ASTM D412 |
撕裂强度 tear strength |
kN/m | ASTM D624 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
陶氏汽车零碎再创碳纤维粘接技术新高度
2016-05-23 陶氏汽车系统业务部在碳纤维粘接解决方案的创新成果――BETAFORCETM复合材料结构胶注射粘接技术,已经成功应用于宝马集团最新推出的全新宝马7系。 这一创新注射粘接技术的开发再次证明,通过调整开放时间和周期时间等参数,陶氏汽车系统能在不影响机械性能的条件下按照客户的特殊生产要求进行定制结构胶,帮助客户提高其装配效率。应用注射粘接技术,碳纤维部件得以更广泛地应用于多种材料的装配,有效支持汽车制造商的轻量化策略。 注射粘接技术可用于碳纤维部件与车顶侧架的金属部 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |