牌号简介 About |
---|
Tecnoflon PL 557是一种新型低温过氧化物固化氟弹性体,氟含量为65.5%。Tecnoflon® PL 557具有优异的低温灵活性(TR10=-29°C),接近Tecnoflon PL 455,但具有更好的耐化学性和渗透性。与所有其他过氧化替克诺氟隆可固化等级一样,它具有良好的加工性能,而且需要非常短的后固化周期。Tecnoflon PL 557的一些基本特性是:优异的低温柔性、低后固化、优越的模具流动性、无模具污染、优异的模具释放度Tecnoflon® PL 557可用于O型环、垫圈和密封件的注射、注射压缩和传递成型。这种材料可以挤压成软管或型材,也可以压延成板材或皮带。Tecnoflon® PL 557可与固化系统和其他典型氟弹性体复合成分组合。混合可以通过两个辊磨机或内部搅拌机完成。 TECNOFLON® PL 557 is a new generation low temperature peroxide curable fluoroelastomer with 65.5% wt fluorine content. Tecnoflon® PL 557 exhibits excellent low temperature flexibility (TR10 = -29°C), close to Tecnoflon® PL 455, but with improved chemical resistance and permeability. Like all other Tecnoflon® peroxide curable grades, it exhibits excellent processability; moreover it needs very short post-curing cycles. Some of the basic properties of TECNOFLON® PL 557 are: Excellent low temperature flexibility Low post cure Superior mold flow Lack of mold fouling Excellent mold release Tecnoflon® PL 557 can be used for injection, injection-compression and transfer molding of O-rings, gaskets and seals. This material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Tecnoflon® PL 557 can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
门尼粘度 Mooney viscosity 2 |
|||
ML 1+10,121℃ ML 1+10,121℃ 2 |
35 | MU | |
氟含量 Fluorine content 2 |
66 | % |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 聚合物原料 |
【新闻资讯】查看全部
浅析LED微孔排气孔的资料选择
2018-09-29 由于LED及其驱动器产生热量引起内部压力逐渐积聚,LED产品存在外壳和密封失效的现象。如果增加一个疏水性微孔排气孔,通过将灰尘和液体从外壳中排出,就能实现减轻外壳中的压力 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |