牌号简介 About |
---|
CALIBRE™ 200-8 聚碳酸酯树脂系列产品的制造符合美国食品和药物管理局(FDA)以及欧盟食品接触法规的要求。这些产品具有优异的抗冲击性能、耐热畸变性能和光学透明度,其熔体强度高,适用于片材挤出加工领域。CALIBRE™ 200-8系列产品有两种添加剂类型的产品:CALIBRE 200:不含脱模剂或者抗紫外线稳定剂。CALIBRE 201:含脱模剂产品。 政府和业界标准: 美国食品和药物管理局法规 21 CFR 177.1580 美国安全检测实验室 (UL) 欧盟有关食品接触的指令 2002/72/EC 应用领域: 食品加工机械外壳 液体容器 巧克力模 定制片材 食品器具 瓶子 包装材料应用 |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.20 | g/cm³ | ISO 1183/A |
熔体质量流动速率 Melt Flow Rate |
|||
300℃,1.20kg 300℃,1.20kg |
8.0 | g/10min | ISO 1133 |
收缩率 Shrinkage rate |
|||
MD MD |
0.50 to 0.70 | % | ISO 294-4 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
2300 | MPa | ISO 527-2/50 |
拉伸强度 tensile strength |
|||
断裂 fracture |
71.0 | MPa | ISO 527-2/50 |
屈服 yield |
MPa | ISO 527-2/50 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ISO 527-2/50 | |
屈服 yield |
% | ISO 527-2/50 | |
弯曲模量 Bending modulus 2 |
MPa | ISO 178 | |
弯曲强度 bending strength 2 |
MPa | ISO 178 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
kJ/m² | ISO 180-A | |
悬臂梁无缺口冲击强度 Notched impact strength of cantilever beam |
|||
23℃ 23℃ |
ISO 180 | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,退火 1.8 MPa, annealed |
℃ | ISO 75-2/A | |
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ISO 75-2/A | |
0.45 MPa,退火 0.45 MPa, annealed |
℃ | ISO 75-2/B | |
维卡软化温度 Vicat Softening Temp |
|||
B50 B50 |
℃ | ISO 306 | |
球压温度 Ball pressure temperature |
℃ | IEC 60335-1 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
相比漏电起痕指数 Compared to the leakage tracing index |
|||
2.00 mm 2.00 mm |
V | IEC 60112 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level 3 |
UL 94 | ||
1.60 mm 1.60 mm |
UL 94 | ||
3.20 mm 3.20 mm |
UL 94 | ||
灼热丝起燃温度 Igniting temperature of the hot wire 3 |
|||
2 mm,5.0 sec 2 mm,5.0 sec 3 |
℃ | IEC 60695-2-13 | |
光学性能 optical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
透光率 Transmittance |
% | ASTM D1003 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 0.079 in/min |
3 这个额定值并非为了反映这种或任何其他材料在实际起火条件下造成的危险。 |
4 This rating not intended to reflect hazards presented by this or any other material under actual fire conditions. |
【新闻资讯】查看全部
茂名石化:三元共聚聚丙烯年产量创历史新高
2021-01-26 搜料网资讯: 2020年,茂名石化化工分部聚烯烃运行部以持续攻坚创效为主线,做大新产品和专用料产量,其中三元共聚产品年产量3.13万吨,创历史新高。 三元共聚树脂产品为茂名石化 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |