物性表自定义
公司信息及水印
公司信息及水印
下载中文物性表
下载英文物性表
邮件发送/他人
| 牌号简介 About |
|---|
| 说明：SEB853/72是采用高压技术生产的牌号。用该产品获得的薄膜具有优异的光学性能、良好的密封性和较低的凝胶量。该等级的最低生物基含量为95%，根据ASTM D6866测定。添加剂：助滑剂介质。防堵剂介质。用途：复合膜；通用；固体产品自动包装。工艺：吹膜挤出。 Braskem PE SEB853/72 SEB853/72 is a grade produced under high pressure technology. Films obtained with this product show outstanding optical properties, good sealability, and low gel amount. The minimum biobased content of this grade is 95%, determined according to ASTM D6866. Additives: Slip Agent Medium. Antiblocking Agent Medium. Applications: Lamination film; general purpose; automatic packaging of solids products (FFS). Process: Blown Film Extrusion. Braskem PE SEB853/72 SEB853/72 is a grade produced under high pressure technology. Films obtained with this product show outstanding optical properties, good sealability, and low gel amount. The minimum biobased content of this grade is 95%, determined according to ASTM D6866. Additives: Slip Agent Medium. Antiblocking Agent Medium. Applications: Lamination film; general purpose; automatic packaging of solids products (FFS). Process: Blown Film Extrusion. Braskem PE SEB853/72 SEB853/72 is a grade produced under high pressure technology. Films obtained with this product show outstanding optical properties, good sealability, and low gel amount. The minimum biobased content of this grade is 95%, determined according to ASTM D6866. Additives: Slip Agent Medium. Antiblocking Agent Medium. Applications: Lamination film; general purpose; automatic packaging of solids products (FFS). Process: Blown Film Extrusion. |
产品描述 Product Description
用途：薄膜;包装;通用;
加工条件：吹塑薄膜
性能特点： 可回收; 低速凝固晶点; 无BPA; 光学性能; Renewable resources,Optical performance,Low speed solidification point,No BPA
| 技术参数 Technical Data | |||
|---|---|---|---|
|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
密度 Density |
0.923 | g/cm³ | ASTM D792 |
|
熔体质量流动速率 Melt Flow Rate |
|||
|
190℃，2.16kg 190℃，2.16kg |
2.7 | g/10min | ASTM D1238 |
|
Biobased Content Biobased Content |
95 | % | ASTM D6866 |
|
薄膜 film |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
拉伸强度 tensile strength |
|||
|
TD，断裂，38 µm，吹塑薄膜 TD, fracture, 38 µ m, blow molded film |
20.0 | MPa | ASTM D882 |
|
MD，断裂，38 µm，吹塑薄膜 MD, fracture, 38 µ m, blow molded film |
30.0 | MPa | ASTM D882 |
|
拉伸应变 Tensile strain |
|||
|
TD，断裂，38 µm，吹塑薄膜 TD, fracture, 38 µ m, blow molded film |
% | ASTM D882 | |
|
MD，断裂，38 µm，吹塑薄膜 MD, fracture, 38 µ m, blow molded film |
% | ASTM D882 | |
|
落锤冲击 Drop hammer impact |
|||
|
38 µm，吹塑薄膜 38 µ m, blow molded film |
g | ASTM D1709 | |
|
埃尔曼多夫抗撕强度 Elmandorf tear strength |
|||
|
TD，38 µm，吹塑薄膜 TD, 38 µ m, blow molded film |
g | ASTM D1922 | |
|
光学性能 optical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
光泽度 gloss |
|||
|
60°，38.0 µm，吹塑薄膜 60 °, 38.0 µ m, blow molded film |
ASTM D2457 | ||
|
雾度 Haze |
|||
|
38 µm，吹塑薄膜 38 µ m, blow molded film |
% | ASTM D1003 | |
| 备注 |
|---|
| 1 一般属性：这些不能被视为规格。 |
| 2 F50 |
|
【新闻资讯】查看全部
思瑞影像测量仪如何测量O型密封圈
2016-03-30 O型密封圈是一种截面为圆形的橡胶圈，引其截面为O型，故称其为O型密封圈。是液压与气压传动系统中使用最广泛的一种，由一个或几个零件组成的环形罩，固定在轴承的一个套圈或垫圈上并与另一套圈或垫圈接触或形成窄的迷宫间隙，主要用于机械零部件在静态条件下防止液体和气体介质的泄露。下面就以O型密封圈为例研究它的测量解决方案。 测量O型密封圈，由于是橡胶材质，三坐标测量仪在这里就不是特别适用了，所以我们需要用到的测量仪器就是影像测量仪。O型密封圈在密封件中应用较为广泛，密封圈的尺寸是保证液 |
|
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任，并强烈建议在最终选择材料前，就数据值与材料供应商进行验证。 |
当前牌号已加入对比
支付宝
微信支付