牌号简介 About |
---|
高密度聚乙烯,共聚体,基本稳定。乙烯和1-丁烯是生产上述等级产品的唯一单体;没有使用增塑剂或有色母料。产品颜色自然。应用:注塑,汽车零件,用于火星运输的板条箱。 High density polyethylene, copolimer, with basic stabilization. Ethylene and 1-butene are the only monomers used for producing the above grade; there are not used plasticizers or coloured masterbatches. The product has natural color. Applications: injection molding, automotive parts, crates for martime transports. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.950 到 0.970 | g/cm³ | ISO 1183 |
熔体质量流动速率 Melt Flow Rate 2 |
|||
190℃,2.16kg 190℃,2.16kg 2 |
6.0 到 9.0 | g/10min | ISO 1133 |
抗环境应力开裂 ESCR(Environmental Stress Cracking Resistance) |
|||
50 ℃,100%非离子表面活性剂 50 ℃, 100% non-ionic surfactant |
> 6.00 | hr | ASTM D1693 |
灰份含量 Ash Content |
< 0.080 | % | ASTM D5630 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
屈服,23℃,注塑成型 Yield, 23 ℃, injection molding |
> 23.0 | MPa | ISO 527-2/50 |
拉伸应变 Tensile strain |
|||
屈服,23℃,注塑成型 Yield, 23 ℃, injection molding |
% | ISO 527-2/50 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁无缺口冲击强度 Notched impact strength of cantilever beam 3 |
|||
23℃,注塑成型 23 ℃, injection molding 3 |
kJ/m² | ISO 180/1U | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
维卡软化温度 Vicat Softening Temp |
|||
A50 A50 |
℃ | ISO 306/A50 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
含量 content |
|||
Residual Solvent Residual Solvent |
% | ASTM D4526 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 程序 B |
3 Slotted specimen |
【新闻资讯】查看全部
一货难求的化工原料PTA,真的是有钱都买不到!
2017-12-11 就在12月开始的时候,化工原料PTA现货价格已经涨到了最近3年零2个月内的高点,真正的做到了有价无市的地步,尽管价格贵但是没货啊。 12月初的前4个工作日,可提PTA现货升水期货TA1801的基差目前已经从40-50元涨到了200-250元左右,本波PTA货少炒涨行情势头依旧较为讯猛,可以说是货少利好的情况已经积累到了爆发点后的一次逼空行情,这点也非常出乎市场意料之外。 今年 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |