牌号简介 About |
---|
Moplen HP522H Moplen HP522H是一种聚丙烯均聚物,设计用于生产双向拉伸聚丙烯薄膜(BOPP)。该产品特别适用于普通和共挤的金属化结构。它不含任何滑脱或抗阻塞剂,并且不含硬脂酸钙。由Moplen HP522H制成的BOPP薄膜广泛应用于食品包装行业。有关监管信息,请参阅Moplen HP522H产品管理公告(PSB)。Moplen HP522H Moplen HP522H是PMC根据Basell的许可使用Spheripol工艺生产的聚丙烯均聚物。Moplen HP522H是一种均聚物,尤其适用于金属化BOPP薄膜。Moplen HP522H树脂符合21 CFR 177.1520《食品接触联邦法规》中FDA的要求。Moplen HP522H Moplen HP522H是一种用于生产双轴取向聚丙烯薄膜的聚丙烯均聚物。该产品特别适用于金属化,既可作为单层薄膜,也可用于共挤结构。Moplen HP522H的设计目的是在支架生产线上提供非常稳定的挤压,并提供良好的厚度控制、增加拉伸能力和双向定向准备。Moplen HP522H含有增强的加工稳定性,但不含任何滑动或防堵塞剂。该产品具有低水携带性能,因此也适用于管状BOPP。用Moplen HP522H生产的BOPP薄膜具有良好的机械性能、高冲击强度和耐刺穿性,即使在低温下也是如此。S.薄膜具有良好的防潮、防臭、防油、防脂肪和抗氧化性能,光学性能良好。食品、化妆品和录像带的包装采用Moplen HP522H制成的单层或共挤薄膜,厚度为20-40微米。Moplen HP522H制成的金属化BOPP薄膜也适用于LA。其他柔性薄膜。*Moplen HP522H适用于食品接触。 Moplen HP522H Moplen HP522H is a polypropylene homopolymer designed for the production of biaxially oriented polypropylene films (BOPP). The product is particularly suitable for both plain and coextruded structures for metallization. It does not contain any slip or antiblocking agents and no Calcium Stearate in intentionally added. BOPP films made of Moplen HP522H are widely used in the food packaging industry. Moplen HP522H Moplen HP522H is the polypropylene homopolymer manufactured by PMC under the license of BASELL using the Spheripol process. Moplen HP522H is a homopolymer particularly sui table for Metallizable BOPP film. Moplen HP522H resin meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact. Moplen HP522H Moplen HP522H is a polypropylene homo-polymer for the production of biaxially oriented polypropylene films .The product is particularly suitable for metallization, both as monolayer film & in co-extruded structures. Moplen HP522H has been designed to provide a very stable extrusion on stenter lines & to give excellent thickness control, increased draw ability & readiness to a two way orientation. Moplen HP522H contains a reinforced processing stabilisation but does not contain any slip or anti blocking agents .The product features low water carry-over properties & is therefore also suitable for tubular BOPP .BOPP films produced with Moplen HP522H features good mechanical properties ,high impact strength & puncture resistance ,even at low temperatures .The films form an excellent barrier against moisture ,odours ,oils ,fats & oxidation & feature good optical properties .Monolayer or co-extruded films made of Moplen HP522H with a thickness ranging from 20 to 40 µm are used for the packaging of foodstuffs ,cosmetics & videocassettes .Metallized BOPP films made with Moplen HP522H are also suitable for lamination to other flexible films. * Moplen HP522H is suitable for food contact. |
产品描述 Product Description
厂家:荷兰利安德巴塞尔 LyondellBasell
类别:PP均聚 PP homopolymerization
用途:薄膜;包装;通用;双向拉伸薄膜;食品包装;层压板;媒介包装;化妆品包装;
加工条件:共挤出成型,共挤薄膜,薄膜挤出 Extrusion,Film extrusion
性能特点: 防潮; 抗氧化; 易剥离; 保持香味; 食品接触; 光学性能; 易加工; 拉伸性能好; 机械强度好; 耐油; 阻隔树脂; 均聚物; 冲击性能好; 水携带性低; 抗穿孔性; Grease resistance,Inoxidizability,Good Tensile Strength,Good dissection,Low water portability,High impact resistance,Puncture Resistant,Block resin,Optical performance,Good Rigidity,Food contact compliance,Retention of aroma ,Homopolymer,Excellent Processability,Moisture resistance
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density Density |
0.9 | g/cm³ | ASTM D1505 |
熔体质量流动速率 Melt Flow Rate Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
2 | g/10min | ASTM D1238 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Izod Notched Impact strength Izod Notched Impact strength |
|||
23℃,注塑成型 Injection Molding 23 ℃, injection molding |
49 | J/m | ASTM D256 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 HDT Hot deformation temperature HDT |
|||
0.45 MPa,未退火 unannealed,注塑成型 Injection Molding 0.45 MPa, unannealed, injection molding |
110 | ℃ | ASTM D648 |
维卡软化点 Vicat Softening Point |
155 | ℃ | ASTM D1525 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell Hardness Rockwell hardness |
|||
R 级 R-level |
ASTM D785 | ||
拉伸强度 Tensile Strength Tensile Strength |
|||
屈服 yld,注塑成型 Injection Molding Injection Molding |
MPa | ASTM D638 | |
拉伸应变 Tensile Strain Tensile Strain |
|||
屈服 yld,注塑成型 Injection Molding Injection Molding |
% | ASTM D638 | |
弯曲模量 Flexural Modulus |
|||
注塑成型 Injection Molding |
MPa | ASTM D790 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 MTM17029E |
3 0,20 in/min |
4 0 to 1%, MA 18068 |
5 2,0 in/min |
6 压 力1 (10N) |
7 MA17021 |
8 MA 17031 |
【新闻资讯】查看全部
三菱化学将整合全球MMA业务
2021-02-27 搜料网资讯: 近日,三菱化学公司(MCC)决定合并在新加坡的相关总部职能,并将主要子公司重命名为三菱化学甲基丙烯酸酯,以统一目前分散在MCC,Lucite International和各个地区运营中 |
三菱化学将整合全球MMA业务 搜料网资讯:近日,三菱化学公司(MCC)决定合并在新加坡的相关总部职能,并将主要子公司重命名为三菱化学甲基丙烯酸酯,以统一目前分散在MCC,Lucite International和各个地区运营中的甲基丙烯酸甲酯(MMA)业务,自4月1日起生效2021年,此举旨在加强其全球MMA运营。
自同日起,将成立三菱化学(甲基)丙烯酸甲酯日本有限公司,以加强在日本国内市场的MMA业务。 MCC的MMA业务部在全球增长的市场中拥有11家单体工厂和6家聚合物(丙烯酸树脂)工厂,并通过利用连接区域生产,成本以及供需的数字技术,努力优化全球产品供应网络。 迄今为止,总部职能已在日本和英国执行,但今后,包括全球供应链管理在内的这些职能将在新加坡三菱化学甲基丙烯酸酯公司进行合并,以建立更强大的MMA运营管理基础,从而实现集中,快速的决策,以及各种员工的任命和晋升。 MMA是用于丙烯酸树脂的原材料,可用于包括汽车灯罩,标牌,水族箱,油漆和建筑材料的应用中。全球MMA需求超过300万吨,并且预计将与各国的GDP保持一致。防止液滴感染的丙烯酸树脂片材的市场最近在世界范围内增加。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |
价格走势图
开始时间:
结束时间:
材料厂家:
【牌号齐全,内容全面】
全网共2500+项牌号+上游原料单体+原油价格,最长可追溯近20年价格行情
【精准,及时,权威!】
专业团队挖掘行情信息,第一时间发布行情
抱歉!该牌号暂无认证数据。
免责声明:参考价格是搜料网根据网络大数据拟合分析的结果,仅供参考。实际成交价取决但不限于以下因素:下单时间,付款方式,交货方式,数量,税费,色号,产地,项目信息。
抱歉!暂无数据。
抱歉!暂无数据。