| 牌号简介 About |
|---|
| Moplen HP522H Moplen HP522H是一种聚丙烯均聚物，设计用于生产双向拉伸聚丙烯薄膜（BOPP）。该产品特别适用于普通和共挤的金属化结构。它不含任何滑脱或抗阻塞剂，并且不含硬脂酸钙。由Moplen HP522H制成的BOPP薄膜广泛应用于食品包装行业。有关监管信息，请参阅Moplen HP522H产品管理公告（PSB）。Moplen HP522H Moplen HP522H是PMC根据Basell的许可使用Spheripol工艺生产的聚丙烯均聚物。Moplen HP522H是一种均聚物，尤其适用于金属化BOPP薄膜。Moplen HP522H树脂符合21 CFR 177.1520《食品接触联邦法规》中FDA的要求。Moplen HP522H Moplen HP522H是一种用于生产双轴取向聚丙烯薄膜的聚丙烯均聚物。该产品特别适用于金属化，既可作为单层薄膜，也可用于共挤结构。Moplen HP522H的设计目的是在支架生产线上提供非常稳定的挤压，并提供良好的厚度控制、增加拉伸能力和双向定向准备。Moplen HP522H含有增强的加工稳定性，但不含任何滑动或防堵塞剂。该产品具有低水携带性能，因此也适用于管状BOPP。用Moplen HP522H生产的BOPP薄膜具有良好的机械性能、高冲击强度和耐刺穿性，即使在低温下也是如此。S.薄膜具有良好的防潮、防臭、防油、防脂肪和抗氧化性能，光学性能良好。食品、化妆品和录像带的包装采用Moplen HP522H制成的单层或共挤薄膜，厚度为20-40微米。Moplen HP522H制成的金属化BOPP薄膜也适用于LA。其他柔性薄膜。*Moplen HP522H适用于食品接触。 Moplen HP522H Moplen HP522H is a polypropylene homopolymer designed for the production of biaxially oriented polypropylene films (BOPP). The product is particularly suitable for both plain and coextruded structures for metallization. It does not contain any slip or antiblocking agents and no Calcium Stearate in intentionally added. BOPP films made of Moplen HP522H are widely used in the food packaging industry. Moplen HP522H Moplen HP522H is the polypropylene homopolymer manufactured by PMC under the license of BASELL using the Spheripol process. Moplen HP522H is a homopolymer particularly sui table for Metallizable BOPP film. Moplen HP522H resin meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact. Moplen HP522H Moplen HP522H is a polypropylene homo-polymer for the production of biaxially oriented polypropylene films .The product is particularly suitable for metallization, both as monolayer film & in co-extruded structures. Moplen HP522H has been designed to provide a very stable extrusion on stenter lines & to give excellent thickness control, increased draw ability & readiness to a two way orientation. Moplen HP522H contains a reinforced processing stabilisation but does not contain any slip or anti blocking agents .The product features low water carry-over properties & is therefore also suitable for tubular BOPP .BOPP films produced with Moplen HP522H features good mechanical properties ,high impact strength & puncture resistance ,even at low temperatures .The films form an excellent barrier against moisture ,odours ,oils ,fats & oxidation & feature good optical properties .Monolayer or co-extruded films made of Moplen HP522H with a thickness ranging from 20 to 40 µm are used for the packaging of foodstuffs ,cosmetics & videocassettes .Metallized BOPP films made with Moplen HP522H are also suitable for lamination to other flexible films. * Moplen HP522H is suitable for food contact. |
产品描述 Product Description
用途：薄膜;包装;通用;双向拉伸薄膜;食品包装;层压板;媒介包装;化妆品包装;
加工条件：共挤出成型,共挤薄膜,薄膜挤出 Extrusion,Film extrusion
性能特点： 防潮; 抗氧化; 易剥离; 保持香味; 食品接触; 光学性能; 易加工; 拉伸性能好; 机械强度好; 耐油; 阻隔树脂; 均聚物; 冲击性能好; 水携带性低; 抗穿孔性; Grease resistance,Inoxidizability,Good Tensile Strength,Good dissection,Low water portability,High impact resistance,Puncture Resistant,Block resin,Optical performance,Good Rigidity,Food contact compliance,Retention of aroma ,Homopolymer,Excellent Processability,Moisture resistance
| 技术参数 Technical Data | |||
|---|---|---|---|
|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
密度 Density Density |
0.9 | g/cm³ | ASTM D1505 |
|
熔体质量流动速率 Melt Flow Rate Melt Flow Rate |
|||
|
230℃，2.16kg 230℃，2.16kg |
2 | g/10min | ASTM D1238 |
|
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
悬臂梁缺口冲击强度 Izod Notched Impact strength Izod Notched Impact strength |
|||
|
23℃，注塑成型 Injection Molding 23 ℃, injection molding |
49 | J/m | ASTM D256 |
|
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
热变形温度 HDT Hot deformation temperature HDT |
|||
|
0.45 MPa，未退火 unannealed，注塑成型 Injection Molding 0.45 MPa, unannealed, injection molding |
110 | ℃ | ASTM D648 |
|
维卡软化点 Vicat Softening Point |
155 | ℃ | ASTM D1525 |
|
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
洛氏硬度 Rockwell Hardness Rockwell hardness |
|||
|
R 级 R-level |
ASTM D785 | ||
|
拉伸强度 Tensile Strength Tensile Strength |
|||
|
屈服 yld，注塑成型 Injection Molding Injection Molding |
MPa | ASTM D638 | |
|
拉伸应变 Tensile Strain Tensile Strain |
|||
|
屈服 yld，注塑成型 Injection Molding Injection Molding |
% | ASTM D638 | |
|
弯曲模量 Flexural Modulus |
|||
|
注塑成型 Injection Molding |
MPa | ASTM D790 | |
| 备注 |
|---|
| 1 一般属性：这些不能被视为规格。 |
| 2 MTM17029E |
| 3 0,20 in/min |
| 4 0 to 1%, MA 18068 |
| 5 2,0 in/min |
| 6 压 力1 (10N) |
| 7 MA17021 |
| 8 MA 17031 |
|
【新闻资讯】查看全部 
三菱化学将整合全球MMA业务
2021-02-27 搜料网资讯： 近日，三菱化学公司（MCC）决定合并在新加坡的相关总部职能，并将主要子公司重命名为三菱化学甲基丙烯酸酯，以统一目前分散在MCC，Lucite International和各个地区运营中 |
|
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任，并强烈建议在最终选择材料前，就数据值与材料供应商进行验证。 |
当前牌号已加入对比
支付宝
微信支付