牌号简介 About |
---|
Tecator是一种高性能可熔加工的聚酰胺酰亚胺,在超过500°F的温度环境中保持其优异的机械和磨损性能。Tecator Ti5031在轴承应用中提供高光伏性能,主要是在高负载和低速度下。Tecator(PAI)典型应用:泵零件、气门座、活塞环、密封圈、发动机-变速器零件和轴承保持架。用于半导体工业?烧伤?测试插座,嵌套,底盘和其他应用,如焊接喷嘴头。 TECATOR is a high performance melt processable polyamide-imide that maintains its excellent mechanical and wear properties in temperature environments exceeding 500°F. TECATOR TI5031 offers high PV capabilities in bearing applications, primarily at high loads and low speeds. TECATOR™(PAI) typical applications: Pump parts, valve seats, piston rings, seal rings, engine transmission parts and bearing cages. For the semiconductor industry it is used for ?burn in? test sockets, nests, chassis and other applications such as welding nozzle tips. Excellent weather and gamma radiation resistance Outstanding bearing and wear properties High strength and stiffness Excellent electrical values Good chemical resistance Maintains a high proportion of mechanical properties over a broad temperature spectrum - cryogenic to 500°F. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.46 | g/cm³ | ASTM D792 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
110 | J/m | ASTM D256 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
279 | ℃ | ASTM D648 |
连续使用温度 Continuous use temperature |
260 | ℃ | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
介电常数 Dielectric constant |
ASTM D150 | ||
20.0 GHz 20.0 GHz |
3.80 | ASTM D150 | |
30.0 GHz 30.0 GHz |
ASTM D150 | ||
耗散因数 Dissipation factor |
ASTM D150 | ||
20 GHz 20 GHz |
ASTM D150 | ||
30 GHz 30 GHz |
ASTM D150 | ||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
UL 94 | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
|||
M 级 M-level |
ASTM D785 | ||
拉伸强度 tensile strength |
|||
断裂,23℃ Fracture, 23 ℃ |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂,23℃ Fracture, 23 ℃ |
% | ASTM D638 | |
弯曲模量 Bending modulus |
|||
23℃ 23℃ |
MPa | ASTM D790 | |
弯曲强度 bending strength |
|||
23℃ 23℃ |
MPa | ASTM D790 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
注塑制品褪色的缘由及影响要素
2018-01-02 塑料着色制品受多种因素影响会发生褪色。塑料着色制品的褪色与颜料、染料的耐光性、抗氧性、耐热性、耐酸碱性以及所用树脂的特性有关。应根据塑料制品的加工条件和使用要求,在生产母料时对所需颜料、染料、表面活性剂、分散剂、载体树脂和防老化助剂的上述性能进行综合评定后才可选用。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |