牌号简介 About |
---|
当橡胶部件需要耐油或耐溶剂性能时,建议使用尼泊尔丁腈弹性体(NBR)。尼泊尔丁腈弹性体有广泛的丙烯腈含量范围,以确保在各种条件下的最佳性能。随着丙烯腈含量的增加,燃料、油和溶剂的耐性提高;随着丁二烯含量的增加,低温柔韧性和弹性提高。为了获得广泛的硬度和其他基本性能,可以将Nipol弹性体混合以获得最佳性能。尼泊尔弹性体是最好的价值,除了最苛刻的油,热和化学应用,可在粉末,面包屑,液体和捆形式。尼泊尔丁腈弹性体特别适用于热塑性塑料和热固性改性;它们也用作涂料和粘合剂的添加剂。特殊性能/应用与1312相同,粘度较低。 NIPOL® NITRILE ELASTOMERS (NBR) are recommended when oil or solvent resistance is needed for the proper functioning of rubber parts. Nipol nitrile elastomers are available in a broad range of acrylonitrile content to ensure optimal performance in a variety of conditions. As acrylonitrile content is increased, fuel, oil and solvent resistance improve; low-temperature flexibility and resiliency are improved as butadiene content increases. To obtain a broad spectrum of hardnesses and other essential properties, Nipol elastomers can be blended to achieve optimal performance. Nipol elastomers are the best value for all but the most demanding oil, heat and chemical applications and are available in powder, crumb, liquid and bale forms. Nipol nitrile elastomers are especially suitable for thermoplastics and thermoset modification; they are also used as additives in coatings and adhesives. Special Properties/Applications Same as 1312 with lower viscosity. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.958 | g/cm³ | |
ACN Content ACN Content |
26 | % | |
粘度 viscosity |
9.00 到 16.0 | Pa·s |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
可降解无机聚氨酯有效对立海洋生物污损
2017-01-04 控制防污剂的排放对海洋抗生物附着物至关重要。由于聚氨酯的降解率会随降解段含量的增加而增加的特性,研究人员制备了带降解聚酯链段的聚氨酯用于有机防污剂的释放系统。 出色的基材附着剂: 另一方面,由于降解段是由苯已胺(PEA), 聚丙烯酸丁酯(PBA)转化为聚羟基脂肪酸酯(PHA)的,结晶度会提高但酯基密度随之降低,也会降低降解率。这种可降解聚氨酯能让防污剂以恒定的速率释放,且可通过改变聚酯段调节释放速度。海洋试验表明,聚氨酯防污系统的防污性能好。特别是可降解聚氨 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |