牌号简介 About |
---|
室内中高压耐高温液体硅橡胶材料终端产品说明2组分液体硅橡胶,适用于耐跟踪1A 3.5级,A组分混合比:B=1:1,中高压立式,铂催化,A外观为TrAnsParent和B是灰色的。关键特点:注塑成型,高撕裂强度,高延伸率,低张力,快速硫化,20℃下电气性能优异,在不透气的条件下,A、B混合后保质期为5天,保质期随着温度的升高而降低。适用于中高压电缆附件、室内冷缩及终端、接头、护套等注塑、挤出成型。 Liquid silicone rubber material for indoor medium and high voltage resistance terminal Product Description 2-part liquid silicone rubber, which is suitable for injection or extrusion molding with tracking resistance 1A 3.5 grade, mixing ration of parts A:B=1:1, with standing middle and high voltage, catalyzed by platinum .The appearance of A is transparent and B is grey. Key Features Injection molding High tear strength High elongation Low tension set Rapid vulcanization Excellent electric performance At the temperature of 20 and in the condition of air-proof,the shelf life is 5 days after mixing A and B, the shelf life will decrease with the increasing of the temperature. Applications Medium and high voltage resistant cable accessories, indoor cold shrink and terminal, tie-in and jacket etc suitable for injection and extrusion molding |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.12 | g/cm³ | ASTM D792 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
30 | ASTM D2240 | |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
8.00 | MPa | ASTM D412 |
拉伸应变 Tensile strain |
|||
断裂 fracture |
800 | % | ASTM D412 |
撕裂强度 tear strength 2 |
25.0 | kN/m | ASTM D624 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热固组件 Thermosetting components |
|||
部件 A Component A |
|||
部件 B Component B |
|||
储存稳定性 storage stability |
|||
20 ℃ 20 ℃ |
min | ||
贮藏期限 Storage period |
wk | ||
后固化时间 Post curing time |
|||
200℃ 200℃ |
hr | ||
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
颜色 colour |
|||
-- -- 3 |
|||
-- -- 4 |
|||
固体含量 Solid content |
% | ||
粘度 viscosity |
Pa·s | ||
固化时间 Curing time |
|||
140℃ 140℃ |
hr |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 B 模具 |
3 Part A |
4 Part B |
【新闻资讯】查看全部
FRX Innovations的Nofia®阻燃剂用于聚氨酯泡沫塑料
2022-08-12 FRX Innovations很高兴地宣布,该公司已开始为一家领先的德国豪华汽车制造商的座舱运输其旗舰产品Nofia阻燃剂。此次商业发布将是Nofia,其使用范围扩展到第二种生产模式,并加深了与欧 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |