牌号简介 About |
---|
Optema TC 120是一种乙烯-丙烯酸甲酯共聚物,用于要求在聚乙烯、聚丙烯、尼龙 、聚二氯乙烯或其他基材之间具有良好粘合性的挤出涂覆、共挤涂覆和挤出复合。 它能很好地平衡基材上的粘合性和与共挤低密度聚乙烯和乙烯醋酸乙烯酯共聚物 的夹层粘合性。 它在共挤和挤出涂覆中是一种卓越的热密封层,但可能需要额外 的添加剂或工艺修正以避免冷却辊粘着。 加工条件:在 260°C至300°C (500° F - 572°F)温度范围之间可获得卓越的挤出涂覆效果。 建议加工温度不要高于32 0°C (608°F)。 Optema EMA可在传统的挤出涂覆低密度聚乙烯用挤出设备上加工 。 其广泛的热稳定范围提供了较宽的加工窗口。 挤出机的喷口应采用水冷却以避 免进料口桥接。 表面涂层建议采用哑光冷轧辊表面加工。 Optema TC 120 is an ethylene methyl acrylate copolymer intended for extrusion coating, coextrusion coating and extrusion lamination where good interlayer adhesion between polyethylene, polypropylene, nylon, PVdC or other substrates is required. It offers excellent balance of adhesion onto the substrates and interlayer adhesion with coextruded LDPE and EVA's. It is an excellent heat seal layer in coextrusion and in extrusion coating but additional additives or process modifications may be required to prevent chill roll sticking. Processing Conditions: Excellent results are obtained in extrusion coating at 260°C to 300°C (500°F - 572°F) temperature range. Processing temperatures above 320°C (608°F) are not recommended. Optema EMA can be processed on conventional extrusion equipment designed for extrusion coating LDPE. Their broad thermal stability range offers wide processing conditions window. Water cooling of extruder throat is preferred to avoid hopper bridging. Matte chill roll finishing is recommended for top coating. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,2.16kg 190℃,2.16kg |
6.0 | g/10min | ASTM D1238 |
甲基丙烯酸含量 Methacrylic acid content |
21.5 | wt% | ExxonMobil Method |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
维卡软化温度 Vicat Softening Temp |
47.0 | ℃ | ASTM D1525 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
比利时举行轻量化复合资料处理方案会议
2018-10-29 如果汽车制造商们要遵守将于2025年生效的严格的CO2排放法规,动力传动系统不管是传统的、混合的还是全电的,都需要减重。而复合材料将为实现这一目标发挥重要作用。 这是由热固性塑料的专业公司Vyncolit和Sumitomo Bakelite组织,在比利时根特举行的轻量化复合材料解决方案会议所传递出来的重要信息。 汽车行业正处在一些变化的转折点上,日益严格的CO2排放法规正驱动着采用传统内燃机的汽车转向采用混合动力或全电动动力传动系统的汽车。在一辆电动汽车中, |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |