公司信息及水印
牌号简介 About |
---|
Ingeo™ 4032D可转换成使用温度高达300°F(150°C)的双轴取向膜。该薄膜具有优良的光学性能、良好的可加工性和优良的扭曲度和折叠度。这些特性使4032D薄膜成为层压和其他包装应用的理想产品。其他特性包括风味、油脂和耐油性。 Ingeo biopolymer 4032D, a NatureWorks LLC product, is a thermoplastic resin derived from annually renewable resources and is specifically designed general extrusion processes when a higher melting point product is needed. Ingeo biopolymer 4032D is a general purpose extrusion grade that is used naturally or as part of a formulated blend. When formulated with nucleating agents, product may be crystallized to achieve parts with higher HDT than its amorphous counterpart. This is a high molecular weight biopolymer grade that processes easily on conventional extrusion equipment. Common nucleating agents are talc, ethylene bis-steramide and propriety offerings from third party suppliers Potential applications for Ingeo biopolymer 4032D include: Signage Gift Cards Profiles Ingeo 4032D can be converted into a biaxially oriented film with use temperatures up to 300°F (150°C). This film has excellent optics, good machinability and excellent twist and deadfold. These properties make 4032D film an ideal product for laminations and other packaging applications. Additional properties include barrier to flavor and grease and oil resistance. |
技术参数 Technical Data | |||
---|---|---|---|
薄膜 film |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
薄膜厚度 film thickness |
|||
测试 test |
25 | µm | |
割线模量 Secant modulus |
|||
TD,25 µm TD,25 µm |
3790 | MPa | ASTM D882 |
MD,25 µm MD,25 µm |
3450 | MPa | ASTM D882 |
拉伸强度 tensile strength |
|||
TD,屈服,25 µm TD, yield, 25 µ m |
145 | MPa | ASTM D882 |
MD,屈服,25 µm MD, yield, 25 µ m |
103 | MPa | ASTM D882 |
拉伸应变 Tensile strain |
|||
TD,断裂,25 µm TD, fracture, 25 µ m |
% | ASTM D882 | |
MD,断裂,25 µm MD, fracture, 25 µ m |
% | ASTM D882 | |
埃尔曼多夫抗撕强度 Elmandorf tear strength |
|||
MD,25 µm MD,25 µm |
g | ASTM D1922 | |
撕裂强度 tear strength |
|||
TD,25 µm TD,25 µm |
g | ASTM D1922 | |
二氧化碳传输速率 Carbon dioxide transfer rate |
cm³/m²/24 hr | Internal Method | |
透氧率 Oxygen permeability |
cm³/m²/24 hr | ASTM D1434 | |
水气透过率 Water vapor transmittance |
g·mm/m²/atm/24 hr | ASTM F1249 | |
Spencer Impact Spencer Impact |
J | ||
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
J/m | ASTM D256 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
结晶峰温度 Crystallization peak temperature 12 |
|||
DSC DSC 12 |
℃ | ASTM D3418 | |
光学性能 optical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
光泽度 gloss |
|||
20°,25.4 µm 20°,25.4 µm |
ASTM D2457 | ||
雾度 Haze |
|||
25.4 µm 25.4 µm |
% | ASTM D1003 | |
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
g/cm³ | ASTM D1505 | |
熔体质量流动速率 Melt Flow Rate |
|||
210℃,2.16kg 210℃,2.16kg |
g/10min | ASTM D1238 | |
熔体密度 Melt density |
|||
230℃ 230℃ |
g/cm³ |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
工程技术新境界 清洁传递正能量
2016-04-06 ・ Fortress系列采用Microban抗菌保护材料 ・ Whitewater冷热水交替使用胶管体现出色性能 ・ Hydrocarbon碳氢清洁管为碳氢类清洗剂运输提供安全输送方案 ・ 质量一流的干冰输送软管,专为低温材料定制 ・ Dinga节水型水枪引领节能减排,清洁生产 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |