牌号简介 About |
---|
Ebarta MG 425在双组分低压装置上进行处理。系统MG 400/MG 425/MG 475用硬化剂PUR 19固化。对于该产品范围,可将potlife设置为2.5分钟。通过将mg 425与mg 400混合,e-模量可在630-1550兆帕之间变化。MG 475和MG 480为成品混合物。用砂纸(粒度280)打磨后,表面可涂上商用漆。为了更好地粘合,我们建议使用底漆。硝化纤维素漆在聚氨酯表面的附着性比丙烯酸漆系统好。应用功能零件汽车领域功能零件EDP领域原型零件EDP领域原型零件EDP领域原型汽车领域覆面零件汽车领域覆面零件EDP领域特性中E模量高抗冲击性能优异流动特性 ebalta MG 425 is processed on a two-component low pressure device. The systems MG 400 / MG 425 / MG 475 are cured with the hardener PUR 19. For this product range potlife can be set until 2,5 min. By mixing MG 425 with MG 400 the E-modulus can variably between 630 - 1550 MPa. MG 475 and MG 480 are finished mixtures. After grinding with a sand paper , grit 280, the surface can be varnished with a commercial lacquer. For better adhesion we recommend the use of a primer coat. Nitrocellulose lacquers have a better adhesion on polyurethane surfaces than on acryl-lacquer-systems. Applications Functional parts automotive field Functional parts EDP field Prototyping parts EDP field Prototypes in the automotive field Cladding parts automotive field Cladding parts EDP field Properties medium E-modulus high impact resistance excellent flow properties |
技术参数 Technical Data | |||
---|---|---|---|
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁无缺口冲击强度 Charpy Unnotch Impact strength |
68 到 92 | kJ/m² | ISO 179 |
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
|||
20℃ 20℃ |
1.13 到 1.17 | g/cm³ | |
粘度 viscosity |
|||
25℃ 25℃ |
0.65 到 0.85 | Pa·s | |
固化时间 Curing time |
|||
20℃ 20℃ |
0.33 到 0.50 | hr | |
储存稳定性 storage stability |
|||
20 ℃ 20 ℃ |
0.83 到 1.0 | min | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ISO 7619 | ||
弯曲模量 Bending modulus |
MPa | ISO 178 | |
弯曲强度 bending strength |
MPa | ISO 178 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ISO 75-2/B | |
玻璃化转变温度 Glass transition temperature |
℃ | DSC | |
热固组件 Thermosetting components |
|||
树脂 resin |
|||
硬化法 Hardening method |
|||
后固化时间 Post curing time |
|||
60℃ 60℃ |
hr |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
汽车产量转降为增!多个行业同比增长,装备制造业增长加快
2019-12-18 12月16日,国家统计局发布数据显示,11月,我国工业增加值同比实现大幅增长,创下近5个月来的新高。其中,汽车制造业延续了上个月的回升态势,产量实现同比正增长。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |