牌号简介 About |
---|
FS-80-P-1是一种长玻璃纤维增强阻燃型间苯二甲酸二烯丙酯模塑料,符合ASTM D5948型GII-30F的要求。 FS-80-P-1 is a long glass fiber reinforced, flame retardant, diallyl meta-phthalate molding compound, which meets the requirements of ASTM D5948 Type GII-30F |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.73 | g/cm³ | ASTM D792 |
收缩率 Shrinkage rate |
|||
MD MD |
0.15 到 0.35 | % | ASTM D955 |
吸水率 Water absorption rate |
|||
48hr 48hr |
0.30 | % | ASTM D570 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
88.0 | MPa | ASTM D638 |
弯曲模量 Bending modulus |
13800 | MPa | ASTM D790 |
弯曲强度 bending strength |
MPa | ASTM D790 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
J/m | ASTM D256-A | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648-A | |
导热系数 Thermal conductivity coefficient |
W/m/K | ASTM C518 | |
相对温度指数 Relative temperature index |
℃ | UL 746 | |
电气性能 Electrical performance |
℃ | UL 746 | |
冲击机械性能 Impact mechanical performance |
℃ | UL 746 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
介电强度 Dielectric strength 2 |
ASTM D149 | ||
-- -- 3 |
kV/mm | ASTM D149 | |
-- -- 4 |
kV/mm | ASTM D149 | |
耐电弧性 Arc resistance |
sec | ASTM D495 | |
相比漏电起痕指数 Compared to the leakage tracing index |
V | IEC 60112,ASTM D3638 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
极限氧指数 Extreme oxygen index |
% | ASTM D2863 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Wet, 60 Hz |
3 方法A(短时间) |
4 方法B(逐步) |
【新闻资讯】查看全部
上海石化持续开展外购原料及资源置换
2022-01-24 为有效利用公司部分装置富余产能,实现效益最大化,上海石化通过外购相关原料,用于部分装置掺炼,实现增产创效。 2021年,该公司部分装置受原料量的限制,运行负荷一直不高, |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |