牌号简介 About |
---|
推荐用途:105°C tw/thhw/thhn/thhn/thhn/thhn-2绝缘化合物。方式6954是所有导线尺寸上的THWN-2认可的UL QMTT2。化合物6954符合大众-1,各种颜色的油Res I。本产品符合欧盟有害物质限制(RoHS)指令。 Recommended Applications: 105°C TW/THHW/THHN/THWN/THWN-2 insulation compound. Manner 6954 is UL QMTT2 recognized for THWN-2 on all wire sizes. Compound 6954 meets VW-1, Oil Res I in all colors. This product complies with the European Union Restriction on Hazardous Substances (RoHS) directive. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.29 to 1.33 | g/cm³ | ASTM D792 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
ASTM D2240 | ||
邵氏 C Shaw's C |
77 to 83 | ASTM D2240 | |
邵氏 C,10 秒 Shore C, 10 seconds |
67 to 73 | ASTM D2240 | |
拉伸模量 Tensile modulus 2 |
|||
100% 正割 100% secant 2 |
15.2 | MPa | ASTM D638 |
拉伸强度 tensile strength 2 |
23.4 | MPa | ASTM D638 |
拉伸应变 Tensile strain 2 |
|||
断裂 fracture 2 |
% | ASTM D638 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
脆化温度 Embrittlement temperature |
℃ | ASTM D746 | |
老化性能 Aging performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度的变化率 在空气中(136℃,168 hr) The rate of change in tensile strength in air (136 ℃, 168 hr) 3 |
% | UL Unspecified | |
空气中极限伸长率的变化率 The rate of change in ultimate elongation in air 3 |
|||
136℃,168 hr 136℃,168 hr 3 |
% | UL Unspecified | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻率 Volume resistivity |
ohms·cm | ASTM D257 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
极限氧指数 Extreme oxygen index |
% | ASTM D2863 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Unaged Dumbbells |
3 .03 Inch |
【新闻资讯】查看全部
港资来了!香港泛亚在山东莒县投资5亿元,建3万吨PBAT项目
2021-11-10 搜料网资讯: 旭科新材料成立于2021年6月15日,是一家中外合资企业,主营可降解聚酯及相关精细化工产品,由香港泛亚能源(Pan Asia Energy Limited)与聚碳氧联新材料科技(无锡)有限公司 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |