公司信息及水印
牌号简介 About |
---|
Casico™ FR4803是一种热塑性、低烟无卤(LSZH)阻燃、紫外线稳定的天然护套化合物,具有优异的挤出性能。它是基于一种新型的技术,即含有无机填料的CASICO和一种新型的成炭添加剂,这种添加剂具有阻燃性,且烟雾生成非常有限。它可用于对烟雾或腐蚀性和有毒燃烧产物敏感的区域。对于大多数电缆结构,Casico™ FR4803具有足够的阻燃性,以满足单线垂直燃烧试验。Casico™ FR4803符合以下使用良好的商业挤压实践和测试程序的适用要求:BS 7655 LTS1-4 EN 50173 EN 50288 EN 50290-2-27 EN 50363-8 TM7 IEC 60227 VDE 0207 TEIL 24(hm2、hm4和hm5)VDE 0250 TEIL 215 Casico FR4803 is a thermoplastic, low smoke zero halogen (LSZH) flame retardant, UV stabilised, natural jacketing compound combining with excellent extrusion properties. The composition is based on the elements Carbon, Hydrogen, Oxygen, Silicon and Calcium. Compounds based on these elements will therefore be the only significant constituents of the combustion fumes. Other elements may be present in concentrations less than 0.1%. It is based on the novel technology, Casico, containing inorganic filler and a novel char-forming additive which confer flame retardancy with very limited smoke generation. Applications Casico FR4803 is designed for: Jacket for 90 °C rated building wires (installation cables) and 1 kV low voltage cables It can be used in areas sensitive to smoke or corrosive and toxic combustion products. For most cable constructions, Casico FR4803 has sufficient flame retardancy to satisfy single wire vertical burning tests. Specifications Casico FR4803 meets the applicable requirements below using sound commercial extrusion practice and testing procedures: ASTM D 1248 Type I, Class A, Category 4 ISO 1872-PE KGHN-23D006 The following cable material standards are met by Casico FR4803: EN 50290-2-27 EN 50363-8 TM7 VDE 0207 Teil 24 (HM2, HM4 & HM5) BS 7655 LTS1-4 Cables manufactured with Casico FR4803 using sound extrusion practice normally comply with the following cable product standards: EN 50288 VDE 0250 Teil 215 BS 7211 IEC 60502 Part 1 ST3 Special Features Casico FR4803 consists of specially selected components to offer: Low smoke and reduced toxic or corrosive gas emissions Excellent processing properties Superb system ageing compatibility Low water permeability UV stabilised and suitable for colouring Possibility for cable downsizing Processability on most PVC/PE extrusion equipment No need for pre-drying normally |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density 3 |
1.15 | g/cm³ | ISO 1183 |
熔体质量流动速率 Melt Flow Rate 3 |
|||
190℃,2.16kg 190℃,2.16kg 3 |
0.40 | g/10min | ISO 1133 |
吸水率 Water absorption rate 4 |
|||
70℃ 70℃ 4 |
0.110 | mg/cm² | IEC 60811-1-3 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness 3 |
|||
邵氏 D,15 秒 Shore D, 15 seconds 3 |
39 | ISO 868 | |
拉伸强度 tensile strength 5 , 6 |
|||
屈服 yield 5 , 6 |
11.0 | MPa | IEC 60811-1-1 |
拉伸应变 Tensile strain 6 |
|||
断裂 fracture 6 |
% | IEC 60811-1-1 | |
弯曲模量 Bending modulus 3 |
MPa | ISO 178 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
低温弯曲 Low temperature bending 6 |
|||
-40℃ -40℃ 6 |
IEC 60811-1-4 | ||
低温冲击 Low temperature shock 6 |
|||
-40℃ -40℃ 6 |
IEC 60811-1-4 | ||
老化性能 Aging performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度的变化率 The rate of change in tensile strength |
|||
-- -- 7 |
% | ISO 1817 | |
100℃,240 hr 100℃,240 hr 6 |
% | IEC 60811-1-2 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻率 Volume resistivity 3 |
ohms·cm | IEC 60093 | |
介电强度 Dielectric strength |
kV/mm | IEC 60243-1 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
氧指数 Oxygen index 8 , 3 |
% | ISO 4589-2 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Breakdown Duration Breakdown Duration 6 |
IEC 60227-2/2.3 | ||
击穿电压 breakdown voltage 6 |
V | ISO 6722 | |
锥形量热试验 Cone calorimetry test |
ISO 5660 | ||
平均热释放速率 Average heat release rate 9 |
kW/m² | ISO 5660 | |
CO CO 9 |
g/cm³ | ISO 5660 | |
CO2 CO2 10 |
g/cm³ | ISO 5660 | |
燃烧热 Combustion heat 11 |
ISO 5660 | ||
点燃时间 Ignition time 9 |
min | ISO 5660 | |
最大热释放速率 Maximum heat release rate 9 |
kW/m² | ISO 5660 | |
Smoke Obscuration Smoke Obscuration 12 |
ISO 5660 | ||
Corrosion(of Combustion Fumes) Corrosion(of Combustion Fumes) 13 |
µS/cm | IEC 60754-2 | |
热压测试 Hot pressing test 14 |
|||
90℃ 90℃ 14 |
% | IEC 60811-3-1 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Compound, ISO 1872-2 |
3 Compound |
4 4 days, Cable (0.7 mm insulation over 1.5 mm² solid Cu) |
5 2.0 in/min |
6 Cable (0.7 mm insulation over 1.5 mm² solid Cu) |
7 After UV ageing, Cable (0.7 mm insulation over 1.5 mm² solid Cu) |
8 程序 A |
9 heat flux 35 kW/m2, 3 mm plaque |
10 heat flux 35 kW/m2 |
11 heat flux 35 kW/m2, 3 mm plaque, MJ/dm3 |
12 heat flux 35 kW/m2, 3 mm plaque, m2/dm3 |
13 Compound, 5.3 |
14 at high temperature, 4 hrs, Cable (0.7 mm insulation over 1.5 mm² solid Cu) |
【新闻资讯】查看全部
美国页岩气热潮将使美国塑料客户受害
2016-09-06 据国外媒体9月4日华盛顿报道,美国埃森哲咨询公司的戴维・扬科维奇和保罗・布加塞克在一篇文章中写道:作为北美洲页岩气热潮的一个结果,大量的新的聚合物产能将陆续投产,其中大部分的聚合物产量将出口。这三个趋势表明美国的塑料客户将从丰富的低成本原料和丰富的国内树脂供应中受益。 文章说,在2020年前美国国内将很有可能每年投产230多亿磅新聚合物(包括聚乙烯、聚氯乙烯、丙烯腈、PET、聚丙烯、聚丙乙烯、EPS)产能,其中大部分聚合物产能使用低成本的页岩气。这将使美国成为世界上诸如聚乙 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |