牌号简介 About |
---|
此产品具有优良的物理、机械、电气性能,以及耐火、阻燃性能。耐火性能达到中国标准GB/T13488-92中FV-0级的规定。适用于制作各种具有阻燃绝缘性能的电工电子产品,如电视机阳极帽、显像管等。 Flame retardant rubber This product has good physical, mechanical and electrical properties, superior flame retardance and self-extinguishing property. The flame retardance of 3mm test piece can reach the class FV-0 stated in the national standard GB/T10707-2008. This product complies with the requirements of ROHS and is applicable to manufacturing of electronic and electric products with flame retardance and insulativity, such as flame retardant gaskets, flame retardant seal rings and wire sheaths for cold cathode fluorescent lamps. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.53 到 1.59 | g/cm³ | ASTM D1505 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
67 到 73 | ASTM D2240 | |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸永久变形 Tensile permanent deformation |
< 10 | % | ASTM D412 |
拉伸强度 tensile strength |
|||
屈服 yield |
> 5.00 | MPa | ASTM D412 |
拉伸应变 Tensile strain |
|||
断裂 fracture |
> 220 | % | ASTM D412 |
撕裂强度 tear strength |
kN/m | ASTM D624 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻率 Volume resistivity |
ohms·cm | ASTM D257 | |
介电强度 Dielectric strength |
kV/mm | ASTM D149 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level 3 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 China Standard GB/T13488-92 |
【新闻资讯】查看全部
工程塑料的运用
2018-10-11 工程塑料用于汽车的主要作用是使汽车轻量化,从而达到节油高速的目的。发达国家将汽车用塑料量作为衡量汽车设计和制造水平高低的一个重要标志,世界上汽车塑料单用量最大的是德国,塑料用量占整体材料的15%。 近年来我国汽车产业发展迅速,目前汽车年产量超过400万辆,按照国外塑料用量预测,汽车行业年用改性塑料在50万吨以上,这其中工程塑料占了很大一部分比例,五大工程塑料性能特性各不相同,在汽车上的用途也各有偏重。 一、尼龙 < |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |