牌号简介 About |
---|
BMC 605模塑化合物是一种矿物填充,玻璃纤维增强聚酯化合物,适用于压缩,转移和填充注射成型。具有良好的成型性、中等的冲击强度、优良的综合电气性能和阻燃性。典型应用包括断路器、变压器线轴和电机端盖。BMC 605模塑料是以各种工业颜色的挤压形式生产的。它可用于长度不超过12英寸的原木或特定重量的预切段塞,直径为1“至2½”。在这个范围内,较小的直径作为多个挤压件提供,重量公差为正负5%,最大为正负15克。 BMC 605 molding compound is a mineral filled, glass-fiber-reinforced polyester compound suitable for compression, transfer and stuffer injection molding. It is characterized by good moldability, medium impact strength, excellent overall electrical properties and flame resistance. Typical applications include circuit breakers, transformer bobbins and motor end bells. BMC 605 molding compound is produced in extruded form in a range of industrial colors. It is available in logs up to 12 inches in length or as precut slugs of specific weight, in diameters 1" to 2 ½" . Within this range, smaller diameters are supplied as multiple extrusions and weight tolerances are plus or minus 5 %, up to a maximum of plus or minus 15 grams. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.95 | g/cm³ | |
吸水率 Water absorption rate |
0.14 | % | |
收缩率 Shrinkage rate |
0.25 - 0.40 | % | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
>= 260 | ℃ | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
耗散因数 Dissipation factor |
|||
绝缘强度 Insulation strength |
13.8 | KV/mm | |
耐电弧性 Arc resistance |
sec | ||
相比漏电起痕指数 Compared to the leakage tracing index |
V | ||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
|||
|
V-0 | UL 94 | |
|
V-0 | UL 94 | |
|
V-0 | UL 94 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
J/m | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
|||
拉伸强度 tensile strength |
MPa | ||
弯曲强度 bending strength |
MPa | ||
压缩强度 compressive strength |
MPa |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 方法A(短时间) |
【新闻资讯】查看全部
2016深圳FILM & APFO展市场宣传再晋级
2016-09-06 近期,日本研究人员研制出一种新型发电薄膜材料,它能利用人的体温或者电脑热源发电,将来还有望借助汽车发动机、工厂管道排放的热量来发电。日本奈良尖端科学技术大学院大学的研究人员在美国《先进功能材料》杂志网络版上发表报告说,他们在由碳纳米管制成的材料表面涂上“冠醚”等有机化合物,制作出了这种厚约1毫米的薄膜。当这种薄膜紧贴人体皮肤时,碳纳米管与有机化合物之间发生的相互作用,会利用体温与外部环境温度之差来发电。薄膜材料与生物能源、机械热能和工业排放的结合给薄膜材料行业的发展开辟一条新的发展道路。创 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |