牌号简介 About |
---|
NP吹扫是一种基于烯烃的吹扫化合物。NP吹扫适用于各种商品和工程树脂的吹扫。当按建议使用时,颜色和材料转换时间大大减少,消除了吹扫过程中产生的大部分废料。NP清洗是非研磨性的,不使用侵蚀性化学反应来有效地清洗注塑机和挤出机。在建议的浸泡时间之后,NP吹扫反应完成,在被下一种树脂/颜色快速取代之前,它将从加工设备中清除之前的材料。特点:在350°F-600°F之间的温度下有效,无需混合,与金属表面的亲和力低,便于热稳定地置换,可留在桶内,用于关闭树脂基清洗,不含有害化学物质推荐的处理说明:确认桶设定值在350°F-600°F之间填充barrEL带NP吹扫停止注塑机或挤出机螺杆。让NP吹扫在桶中在温度下浸泡5-8分钟,引入下一个待处理的树脂/颜色吹扫系统,直到下一个树脂/颜色取代了之前的树脂/颜色和NP吹扫。 NP Purge™ is an olefin-based purging compound. NP Purge is suitable for purging a wide range of commodity and engineering resins. When used as recommended, color and material change-over times are significantly reduced, eliminating much of the scrap material generated during the purge process. NP Purge is non-abrasive and does not use an aggressive chemical reaction to efficiently purge both injection molding machines and extruders. After the recommended soak time, NP Purge's reaction is complete and it will clean the previous material from the processing equipment before quickly being displaced by the next resin/color. Characteristics: Effective at temperatures between 350° F - 600° F No mixing is required Low affinity to metal surfaces, making it easy to displace Thermally stable, can be left in the barrel for shutdown Resin-based purge with no harmful chemicals Recommended Processing Instructions: Confirm barrel set points between 350° F - 600° F Fill barrel with NP Purge Stop injection molding machine or extruder screw. Let NP Purge soak in the barrel at temperature for 5-8 minutes Introduce next resin/color to be processed Purge system until next resin/color has displaced previous resin/color and NP Purge. |
技术参数 Technical Data | |||
---|---|---|---|
暂无数据 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
准备好了!“三桶油”备战天然气保供
2021-10-27 搜料网资讯: 近日,国内电力、煤炭供需偏紧,国际液化天然气(LNG)现货价格高企,加之冷空气提早来临,一夜入冬的天气模式让不少人担忧,今冬明春采暖季的天然气是否够用?作 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |