牌号简介 About |
---|
TECNOFLON® TN 50A是一种中低粘度的氟弹性体三元共聚物,不含硫化剂,因此应添加适当水平的Tecnoflon® FOR M1和Tecnoflon® FOR M2,以达到所需性能。 由于含氟量达68%,获得了耐化学性和抗压缩形变的平衡。分子量的小心分布以及中低粘度的特性使之在流变性质至关重要的注射成型或挤塑等应用场合的使用性能达到最大化。 Tecnoflon® TN 50A 的一些基本特性: -- 杰出的模内流动性 -优异的脱模性能 良好的压缩形变 -良好的挤出性能 Tecnoflon® TN 50A可用于模压、注塑和传递模塑成型轴密封件、阀杆密封件、O型环、垫圈、密封件。可以与固化系统和其它常规含氟弹性体配混材料混合。混合机械可用双辊研磨机或密炼机。 Tecnoflon® TN 50A 可以挤塑成软管或型材,也可压延成片材或带材。 成品可采用各种橡胶加工方法制备。 TECNOFLON® TN 50A is a medium-low viscosity fluoroelastomer terpolymer. It does not contain curatives, therefore the proper levels of Tecnoflon® FOR M1 and Tecnoflon® FOR M2 must be added to achieve required properties. Thanks to its 68% of fluorine content, a good compromise between chemical resistance and compression set value is obtained. The careful distribution of molecular weights and medium-low viscosity maximize its performance in applications such as injection molding or extrusion where rheological properties are critical. Some of the basic properties of Tecnoflon® TN 50A are: Very good mold flow Superior mold release Good compression set Good extrusion behavior Tecnoflon® TN 50A can be used for compression, injection and transfer molding of shaft seals, valve stem seals, O-rings, gaskets and seals. This material can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers. Tecnoflon® TN 50A can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
门尼粘度 Mooney viscosity 2 |
|||
ML 1+10,121℃ ML 1+10,121℃ 2 |
23 | MU | |
氟含量 Fluorine content 2 |
68 | % |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 聚合物原料 |
【新闻资讯】查看全部
加强塑料的特性
2018-09-21 为了进一步改善热固及热塑性塑料的机电性能。常在塑料中加入玻璃纤维填料(简称玻纤),作为增强材料,以树脂为粘结剂而组成新型复合材料,通称为增强塑料(热固性塑料的增强塑料又称为玻璃钢)。由于塑料配方的玻璃纤维的品种、长度、含量等不同,其工艺性及使用特性也各不相同。本节主要介绍模压用的热固性增强塑料及注射用的热塑性增强塑料。 热固性增强塑料 热固性增强塑料是以树脂、增强材料、辅助剂等组成。其中树脂作为粘结剂,它要求有良好的流动性、 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |