牌号简介 About |
---|
Silopren® Gel 7206是一种配套的易浇注、无溶剂、透明无色的双组分快速固化硅胶。将A和B组分以1:1的混合比混合后,材料在室温下通过加成反应固化。通过加热可以进一步加速固化。主要特点和优点,方便1:1混合低重量,无溶剂快速固化在室温下具有高弹性潜力的软凝胶应用Silopren® Gel 7206被开发用于电缆接头的灌封。 Silopren Gel 7206 is a kit matched easily pourable, solvent free, clear and colourless two-component fast curing silicone gel. After mixing the A and the B component at a mix ratio of 1:1 the material cures at room temperature by an addition reaction. Further acceleration of the cure is possible by heat. Key Features and Benefits Convenient 1:1 mixing by weight Low viscosity, free of solvents Fast cure at room temperature Soft gel with high elasticity Potential Applications Silopren Gel 7206 was developed for potting of electrical cable joints. |
技术参数 Technical Data | |||
---|---|---|---|
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
介电强度 Dielectric strength |
25 | kV/mm | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热固组件 Thermosetting components |
|||
部件 A Component A |
按重量计算的混合比: 1.0 | ||
部件 B Component B |
按重量计算的混合比: 1.0 | ||
贮藏期限 Storage period |
|||
< 27℃ < 27℃ |
> 13 | wk | |
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
颜色 colour |
|||
-- -- 2 |
Clear/Transparent | ||
-- -- 3 |
|||
粘度 viscosity |
|||
20℃ 20℃ 2 |
Pa·s | ||
20℃ 20℃ 3 |
Pa·s | ||
固化时间 Curing time |
|||
23℃ 23℃ |
hr | ||
储存稳定性 storage stability |
|||
23℃ 23℃ |
min |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Part B |
3 Part A |
【新闻资讯】查看全部
库存压力上升,丙烯合同价钱下降
2019-03-01 据ICIS2月26日休斯顿报道,美国2月丙烯合同价格较上月下跌1.5美分/磅,大部分市场处于长期供应状态。 根据2月份的协议,聚合物级丙烯(PGP)合同价格为每磅38.5美分(合849美元/吨),化学级丙烯(CGP)合同价格为每磅37.0美分。 今年2月是丙烯合同价格连续第4个月下跌。由于生产良好和出口困难,丙烯合同价格一直受到库存水平上升的压力。 虽然炼油厂的开工率在春季周转季节开始时有所下降,但裂解装置和其他来源的丙烯产量仍然不错。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |