牌号简介 About |
---|
Resinoid 1505是一种磨碎玻璃增强的两步酚醛模塑料,具有良好的机械和电气性能。本产品专为需要极低后模收缩的电气应用而设计。这种材料是颗粒状的,适用于注射、转移或压缩成型。它可以在自动设备上执行。 Resinoid 1505 is a milled glass reinforced, two-step phenolic molding compound offering good mechanical and electrical properties. This product has been specifically formulated for electrical applications where very low post-molded shrinkage is desired. This material comes in granular form and is suitable for injection, transfer or compression molding. It can be preformed on automatic equipment. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.86 | g/cm³ | ASTM D792,ISO 1183 |
收缩率 Shrinkage rate |
|||
MD MD |
0.10 | % | ASTM D955 |
MD MD |
0.10 | % | ISO 294-4 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
屈服 yield |
38.4 | MPa | ASTM D638 |
屈服 yield |
38.6 | MPa | ISO 527-2 |
弯曲模量 Bending modulus |
|||
-- -- |
MPa | ASTM D790 | |
-- -- |
MPa | ISO 178 | |
弯曲强度 bending strength |
|||
-- -- |
MPa | ASTM D790 | |
-- -- |
MPa | ISO 178 | |
压缩强度 compressive strength |
|||
-- -- |
MPa | ASTM D695 | |
-- -- |
MPa | ISO 604 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
-- -- |
J/m | ASTM D256-A | |
-- -- |
kJ/m² | ISO 180-2A | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
介电强度 Dielectric strength |
kV/mm | ASTM D149,IEC 60243-1 | |
耐电弧性 Arc resistance |
sec | ASTM D495 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
突发!1死4伤,一有机硅企业化学品泄漏致火灾爆炸
2021-09-11 搜料网资讯: 2021年9月8日9时50分,加拿大安大略省多伦多市东约克区一家有机硅企业Siltech公司发生化学品泄漏火灾爆炸事故,造成1人死亡、1人重伤。 事故发生后,当地消防中心、公安 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |