牌号简介 About |
---|
Menzolit® SMC 1800是一种基于Unic树脂配方的片状模塑料。该产品是玻璃纤维增强,含有矿物填料。如果发生火灾,产品不会熔化,也不会形成液滴,也不会产生过量的烟雾。这种材料是在加热的钢模中压缩成型的。建议使用镀铬工具。该产品不含卤素和任何重金属。Menzolit® SMC 1800适用于要求极高机械性能和低重量的结构应用。这些复合材料将模具加工成注重机械强度的零件,以替换金属,从而通过保持其他性能特征(如刚度、低热膨胀和低收缩)来减轻重量。其弹性矩阵特性使其非常适合在疲劳和动态载荷中具有挑战性的应用。 Menzolit® SMC 1800 is a sheet moulding compound based on an unic resin formulation. The product is glass fibre reinforced and contains mineral fillers. In case of fire the product doesn't melt, neither does it form droplets nor is smoke generation excessive. The material is compression moulded in heated steel moulds. It is recommended to work with chrome plated tools. The product does not contain halogens nor any heavy metals. Menzolit® SMC 1800 is for structural applications requiring extreme high mechanical properties and low weight. These compounds mould to parts focussing on mechanical strength for replacement of metals in order to reduce the weight by keeping other performance characteristics like stiffness , low thermal expansion and low shrinkage . Its resilient matrix properties make it highly suitable for applications challenging in fatigue and dynamic loads. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
收缩率 Shrinkage rate |
|||
-- -- |
0.11 | % | ISO 2577 |
-- -- |
0.0 | % | DIN 53464 |
吸水率 Water absorption rate |
|||
23℃,24hr 23℃,24hr |
< 0.50 | % | ISO 62 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
12000 | MPa | ISO 527-2 |
拉伸强度 tensile strength |
|||
断裂 fracture |
160 | MPa | ISO 527-2 |
弯曲模量 Bending modulus |
MPa | ISO 178 | |
弯曲强度 bending strength |
MPa | ISO 178 | |
泊松比 Poisson's ratio |
|||
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁无缺口冲击强度 Charpy Unnotch Impact strength |
kJ/m² | ISO 179 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ISO 75-2/A | |
连续使用温度 Continuous use temperature |
℃ | ||
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
1/℃ | ISO 11359-2 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
3.00 mm 3.00 mm |
UL 94 | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
玻纤含量 Fiberglass content |
% | ISO 1172 | |
Material Designation Material Designation |
EN 14598-1 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
科思创成为Japan Fine Coatings公司的唯一所有者
2022-01-20 搜料网资讯: 截至2022年1月14日,科思创现在是Japan Fine Coatings Co., Ltd. (JFC)的唯一所有者。该公司之前是与JSR公司(JSR)的合资企业。JFC是位于日本筑波的领先光纤涂层供应商之一。科思 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |