牌号简介 About |
---|
Safron® H712-52RNM聚丙烯树脂是一种薄壁、高速注射成型的有核均聚物,具有良好的物理性能平衡和易加工性。它是由受控的流变学产生的,分子量分布窄,产生的部分变形最小。Safron® H712-52RNM聚丙烯树脂也适用于挤出涂层和层压。 Safron® H712-52RNM Polypropylene Resin is a nucleated homopolymer for thin wall, high speed injection moulding combining a good balance of physical properties with easy processability. It is produced by controlled rheology, has a narrow molecular weight . distribution and produces parts with minimal distortion. Safron® H712-52RNM Polypropylene Resin is also suitable for extrusion coating and lamination. Typical Applications Thin walled food/cosmetic packaging Houseware and appliances Caps and closures Office accessories and pens Extrusion coating |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.900 | g/cm³ | ISO 1183 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
50 | g/10min | ISO 1133 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
屈服,注塑成型 Yield, injection molding |
32.0 | MPa | ISO 527-2 |
拉伸应变 Tensile strain |
|||
屈服,注塑成型 Yield, injection molding |
8.5 | % | ISO 527-2 |
弯曲模量 Bending modulus |
|||
注塑成型 injection molding |
1500 | MPa | ISO 178 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
|||
23℃,注塑成型 23 ℃, injection molding |
kJ/m² | ISO 179 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ISO 75-2/B | |
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ISO 75-2/A | |
维卡软化温度 Vicat Softening Temp |
℃ | ISO 306/B |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Injection Molded |
【新闻资讯】查看全部
威猛巴顿菲尔在K 2016重点展现UNILOG B8控制零碎
2016-08-01 在“智能化”宣言的推动下,威猛巴顿菲尔将会在K 2016上重点展示其UNILOG B8控制系统,目前该系统适用于PowerSeries的所有机器。 威猛巴顿菲尔将于K 2016重点展 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |