牌号简介 About |
---|
聚对苯二甲酸丁二醇酯(PBT)是一种具有优异绝缘性能的半结晶工程热塑性塑料。各种类型的凝灰岩具有良好的强度和刚度,具有低吸水性、高热稳定性、特殊的电气绝缘性、优异的尺寸稳定性和耐各种化学、溶剂和油的影响。注射成型用阻燃级PBT玻璃。 TUFBET® Polybutylene Terephthalate (PBT) Compounds are semi-crystalline engineering thermoplastics with excellant insulation properties. Various TUFBET grades offer good strength along with stiffness with low moisture absorption, high thermal stability, exceptional electrical insulation, outstanding dimensional stability and resistance to the effects of a wide range of chemical, solvents and oils. PBT Glass Filled Grade with Flame Retardant for Injection Molding. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.66 | g/cm³ | ISO 1183 |
含水量 water content |
< 0.20 | % | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
5.0 | kJ/m² | ISO 180 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
180 | ℃ | ISO 75-2/A |
熔融温度 Melting temperature |
|||
DSC DSC |
225 | ℃ | ISO 3146 |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity |
ohms | ASTM D257 | |
体积电阻率 Volume resistivity |
ohms·cm | ASTM D257 | |
相比漏电起痕指数 Compared to the leakage tracing index |
V | IEC 60112 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
灼热丝起燃温度 Igniting temperature of the hot wire |
℃ | IEC 60695-2-13 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
ISO 2039-2 | ||
M 级 M-level |
ISO 2039-2 | ||
R 级 R-level |
ISO 2039-2 | ||
拉伸强度 tensile strength |
|||
断裂 fracture |
MPa | ISO 527-2 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ISO 527-2 | |
弯曲模量 Bending modulus |
MPa | ISO 178 | |
弯曲强度 bending strength |
MPa | ISO 178 |
备注 | |||
---|---|---|---|
暂无数据 |
【新闻资讯】查看全部
汽车行业对制造工艺配备模具提出新应战
2016-01-25 随着汽车工业日新月异的发展,汽车行业的冲压材料不断地向高强度、轻量化的趋势发展,这对汽车制造工艺装备模具行业提出了新的挑战。硬铬作为一种高强度的金属,被广泛应用在汽车大型模具电镀的工艺上。电镀硬铬技术运用在汽车大型覆盖件模具及拉延深度较深的模具表面热处理、汽车冲压模具附属零件表面热处理、锻造用模具和铸造用模具表面热处理,核心在于模具耐磨性、平滑性和耐腐蚀性的提高。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |