牌号简介 About |
---|
35熔体流动澄清均聚物尖峰聚合物聚丙烯1335C3是采用Unipol-PP技术制成的,该技术利用气相流化床反应器和高活性催化剂系统,以确保统一的物理性能和批次之间的一致性。本产品适用于需要良好透明性的注塑应用。包含新技术澄清剂,以获得更高的清晰度。1335C3产品提供:卓越的清晰度、良好的熔融强度和可拉伸性、卓越的颜色和加工稳定性、卓越的清洁度、Pinnacle's 1335C3聚丙烯,由Pinnacle Polymers公司销售,采用天然、未着色颗粒形式,符合CFR标题21第177部分B子部分第177.1520节的适当要求。(c)1.1a,标题为《美国1938年食品、药品和化妆品法》1958年食品添加剂修正案中的“烯烃聚合物”。 35 MELT FLOW CLARIFIED HOMOPOLYMER Pinnacle Polymers Polypropylene 1335C3 is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency. This product is intended for injection molding applications requiring good see-through clarity. Contains new technology clarifier for superior clarity. The 1335C3 product provides: Superior clarity Good melt strength and stretchability Superior color and processing stability Excellent cleanliness Pinnacle's 1335C3 polypropylene, as marketed by Pinnacle Polymers Company, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, Subpart B, Section 177.1520 (c) 1.1a entitled "Olefin Polymers" of the Food Additives Amendment of 1958 to the United States Food, Drug and Cosmetic Act of 1938. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.900 | g/cm³ | ASTM D1505 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
35 | g/10min | ASTM D1238 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength 2 |
|||
屈服,3.20 mm,注塑成型 Yield, 3.20 mm, injection molding 2 |
39.0 | MPa | ASTM D638 |
拉伸应变 Tensile strain 2 |
|||
屈服,3.20 mm,注塑成型 Yield, 3.20 mm, injection molding 2 |
14 | % | ASTM D638 |
弯曲模量 Bending modulus 3 |
|||
1% 正割,3.20 mm,注塑成型 1% cut, 3.20 mm, injection molded 3 |
1880 | MPa | ASTM D790-A |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch 4 |
|||
23℃,3.2mm,注塑成型 23 ℃, 3.2mm, injection molding 4 |
J/m | ASTM D256 | |
23℃,3.2mm,注塑成型 23 ℃, 3.2mm, injection molding 4 |
kJ/m² | ASTM D256 | |
光学性能 optical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
雾度 Haze |
|||
1270 µm 1270 µm |
% |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 类型 1, 2.0 in/min |
3 类型 1, 0.050 in/min |
4 Type I |
【新闻资讯】查看全部
上海质监抽查塑料购物袋 5批次产品落镖冲击不合格
2016-04-11 近日,从2016年上海市塑料购物袋产品质量监督抽查结果获悉,上海市质量技术监督局对本市生产、销售的塑料购物袋产品进行了监督抽查。 本次共抽查产品29批次,经检验,不合格5批次。本次抽查发现5批次产品不合格,涉及的不合格项目均为落镖冲击。 落镖冲击,是在给定高度一定落镖头的自由落镖冲击下,塑料薄膜或薄片试样破坏数量达到50%时的能量。以冲击破坏质量表示。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |