牌号简介 About |
---|
Royalcast2501结合了工程塑料的刚性和良好的物理性能平衡。当使用MBCA进行固化时,Royalcast 2501可获得弯曲模量为165000 psi、缺口Izod冲击强度为9 ft-lbs/in的80邵氏D硬度材料。作为一种可浇铸材料,Royalcast 2501在通常用于己烷/振动烷(聚氨酯)露天浇铸操作的条件下进行加工。这使得铸模工可以使用低成本的工具来生产全系列的刚性零件,包括:体积短、截面厚或不同的大型零件。 ROYALCAST 2501 combines the rigidity of an engineering plastic with an excellent balance of physical properties. When cured with MBCA, ROYALCAST 2501 yields an 80 Shore D hardness material with a flexural modulus of 165,000 psi and a notched izod impact strength of 9 ft-lbs/in. As a castable material, ROYALCAST 2501 is processed under conditions typically used in an Adiprene/Vibrathane (polyurethane) open casting operation. This allows the molder to use low cost tooling to produce a full range of rigid parts, including: Short volume runs Large parts Parts with thick or varied cross-sections |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.22 | g/cm³ | ASTM D792 |
收缩率 Shrinkage rate |
|||
MD MD |
1.4 | % | 内部方法 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
20℃ 20℃ |
480 | J/m | ASTM D256 |
悬臂梁无缺口冲击强度 Notched impact strength of cantilever beam |
|||
20℃ 20℃ |
无断裂 | ASTM D256 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
ASTM D2240 | ||
邵氏 D,20℃ Shore D, 20 ℃ |
80 | ASTM D2240 | |
邵氏 D,70℃ Shore D, 70 ℃ |
ASTM D2240 | ||
邵氏 D,100℃ Shore D, 100 ℃ |
ASTM D2240 | ||
洛氏硬度 Rockwell hardness |
|||
R 级,20℃ R-grade, 20 ℃ |
ASTM D785 | ||
拉伸强度 tensile strength |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
弯曲强度 bending strength |
MPa | ASTM D790 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
1/℃ | 内部方法 | |
热固组件 Thermosetting components |
|||
树脂 resin |
|||
硬化法 Hardening method |
|||
储存稳定性 storage stability |
min | ||
脱模时间 stripping time |
min | ||
后固化时间 Post curing time |
|||
116℃ 116℃ |
hr |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
百事泰88万元收购控股子公司精密模具49%股权
2017-01-13 1月10日消息,百事泰(833663)发公告称,拟以88.2万元收购控股子公司深圳市百事泰精密模具有限公司(以下简称:精密模具)原股东叶华南49%的股权。本次收购完成后,百事泰将持有精密模具100%股权。 本次交易的定价依据为本次投资的各方根据精密模具业务运营特点,结合双方投资情况,经过双方共同协商确定。 百事泰的主营业务为各类自主品牌产品的研发、设计、生产及进出口跨境电子商务贸易。主要产品以海外销售为主,主要市场在美国、日本、欧洲等地。 百 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |